tascam logo

Support

[Updated] Information about Windows 10 April 2018 Update

2018-07-05

TASCAM Engineering is already hard at work on new Windows 10 April 2018 Update for our products.
We are planning to announce the results of verification as soon as possible in this page.
Many thanks to our loyal users for your patience and understanding through this process.

Last update:July 5, 2018

USB Audio Interface
Result Product Firmware Settings Panel / Driver Note
OK MiNiSTUDIO CREATOR V2.30 V2.31  
OK MiNiSTUDIO PERSONAL V2.30 V2.31  
OK iXR V1.02 V2.00  
OK US-1x2 V1.00 V1.11  
OK US-2x2 New V1.01 V2.11 * 1
OK US-4x4 New V1.01 V2.11 * 1
OK US-16x08 V2.00 V2.11  
OK Celesonic US-20x20 V2.00 V2.10  
OK UH-7000 New V1.08 V1.02  
OK US-100 - -  
OK US-125M - -  
OK US-122MKII New V2.03 V2.05  
OK US-144MKII New V2.03 V2.05  
OK US-322 New V1.03 V1.04  
OK US-366 New V1.03 V1.04  
OK US-1200 New V1.00 V1.03rc1  
OK US-1800 New V1.00 V2.07rc1  

 

* 1 If the Settings Panel software does not show the device name, un-install the already-installed driver then re-install it to resolve the issue.

 

リンク

Celesonic US-20x20
iXR
MiNiSTUDIO CREATOR US-42
MiNiSTUDIO PERSONAL US-32
TASCAM TRACKPACK 2x2
TASCAM TRACKPACK 4x4
TASCAM TRACKPACK iXR
UH-7000
US-100
US-1200
US-122MKII
US-125M
US-144MKII
US-16x08
US-1800
US-1x2
US-2x2
US-322
US-366
US-4x4

特設サイト