The verification results of our TASCAM products with Microsoft's "Windows 10 November" are as shown in the table below.
Note
The results may differ depending on each computer's configuration.
Last update:February 2, 2022
| Result | Product | Firmware | Settings Panel / Driver | Note |
| OK | MiNiSTUDIO CREATOR | V2.30 | V2.33 | |
| OK | MiNiSTUDIO PERSONAL | V2.30 | V2.33 | |
| OK | iXR | V1.02 | V4.00 | |
| OK | US-1x2 | V1.00 | V4.00 | |
| OK | US-2x2 | V1.01 | V4.00 | |
| OK | US-4x4 | V1.01 | V4.00 | |
| OK | US-16x08 | V2.00 | V4.00 | |
| OK | Celesonic US-20x20 | V2.00 | V4.00 | |
| OK | TASCAM TRACKPACK iXR | V1.02 | V4.00 | |
| OK | TASCAM TRACKPACK 2x2 | V1.01 | V4.00 | |
| OK | TASCAM TRACKPACK 4x4 | V1.01 | V4.00 | |
| OK | UH-7000 | V1.08 | V1.02 | |
| OK | US-366 | V1.03 | V1.04 | |
| OK | US-1200 | V1.00 | V1.03rc1 | |
| OK | SERIES 102i | V1.02 | V1.00 | |
| OK | SERIES 208i | V1.02 | V1.00 | |
| OK | US-1x2HR | V1.00 | V1.00 | |
| OK | US-2x2HR | V1.00 | V1.00 | |
| OK | US-4x4HR | V1.00 | V1.00 |
| Result | Product | Firmware | Software / Driver | Note |
| OK | DR-05X | V1.14 | V1.00 | |
| OK | DR-07X | V1.14 | V1.00 | |
| OK | DR-40X | V1.06 | V1.00 | |
| OK | Portacapture X8 | V1.00 | V1.00 |
| Result | Product | Firmware | Settings Panel / Driver | Note |
| OK | Model 24 | V1.61 | V1.20 | |
| OK | Model 16 | V1.32 | V1.20 | |
| OK | Model 12 | V1.30 | V1.20 | |
| OK | Mixcast 4 | V1.10 | V1.00 |
| Result | Product | Firmware | Software / Driver | Note |
| OK | MX-8A | V1.12 | V1.00 | |
| OK | 202MKVII | - | - |
| Result | Product | Version | Note |
| OK New | TASCAM Hi-Res Editor | V1.03 | |
| OK New | TASCAM DCP CONNECT | V1.1.1 | |
| OK New | TASCAM MX CONNECT | V1.2.0 | |
| OK New | TASCAM EZ CONNECT | V1.2.0 | |
| OK New | TASCAM SS250 CONTROL | V2.0.0 | |
| OK New | TASCAM DR FILE TRANSFER | V1.00 | |
| OK New | Poly/Mono Converter | V1.00 | |
| OK New | TASCAM Podcast Editor | V1.0.3 |
JA
