The verification results of our TASCAM products with Microsoft's "Windows 10 May 2021 Update" are as shown in the table below.
The results may differ depending on each computer's configuration.
Last update:May 25, 2021
| Result | Product | Firmware | Settings Panel / Driver | Note |
| OK | MiNiSTUDIO CREATOR US-42 | V2.30 | V2.33 | |
| OK | MiNiSTUDIO PERSONAL US-32 | V2.30 | V2.33 | |
| OK | iXR | V1.02 | V4.00 | |
| OK | US-1x2 | V1.00 | V4.00 | |
| OK | US-2x2 | V1.01 | V4.00 | |
| OK | US-4x4 | V1.01 | V4.00 | |
| OK | US-16x08 | V2.00 | V4.00 | |
| OK | Celesonic US-20x20 | V2.00 | V4.00 | |
| OK | TASCAM TRACKPACK iXR | V1.02 | V4.00 | |
| OK | TASCAM TRACKPACK 2x2 | V1.01 | V4.00 | |
| OK | TASCAM TRACKPACK 4x4 | V1.01 | V4.00 | |
| OK | UH-7000 | V1.08 | V1.02 | |
| OK | US-366 | V1.03 | V1.04 | |
| OK | US-1200 | V1.00 | V1.03rc1 | |
| OK | SERIES 102i | V1.02 | V1.00 | |
| OK | SERIES 208i | V1.02 | V1.00 | |
| OK | US-1x2HR | V1.00 | V1.00 | |
| OK | US-2x2HR | V1.00 | V1.00 | |
| OK | US-4x4HR | V1.00 | V1.00 |
| Result | Product | Firmware | Software / Driver | Note |
| OK | DR-05X | V1.12 | V1.00 | |
| OK | DR-07X | V1.12 | V1.00 | |
| OK | DR-40X | V1.03 | V1.00 |
| Result | Product | Firmware | Settings Panel / Driver | Note |
| OK | Model 24 | V1.61 | V1.20 | |
| OK | Model 16 | V1.32 | V1.20 | |
| OK | Model 12 | V1.21 | V1.20 |
| Result | Product | Firmware | Software / Driver | Note |
| OK | MX-8A | V1.10 | - | |
| OK | 202MKVII | - | - |
INT
