The verification results of our TASCAM products with Microsoft's "Windows 10 November 2019 Update" are as shown in the table below.
Please note that compatibility verification and support for the following products has ended:
US-100, US-125M, US-122MKII, US-144MKII, US-322, US-1800
The results may differ depending on each computer's configuration.
Last update:March 13, 2020
| Result | Product | Firmware | Settings Panel / Driver | Note |
| OK | MiNiSTUDIO CREATOR US-42 | V2.30 | V2.33 | |
| OK | MiNiSTUDIO PERSONAL US-32 | V2.30 | V2.33 | |
| OK | iXR | V1.02 | V4.00 | |
| OK | US-1x2 | V1.00 | V4.00 | |
| OK | US-2x2 | V1.01 | V4.00 | |
| OK | US-4x4 | V1.01 | V4.00 | |
| OK | US-16x08 | V2.00 | V4.00 | |
| OK | Celesonic US-20x20 | V2.00 | V4.00 | |
| OK | TASCAM TRACKPACK iXR | V1.02 | V4.00 | |
| OK | TASCAM TRACKPACK 2x2 | V1.01 | V4.00 | |
| OK | TASCAM TRACKPACK 4x4 | V1.01 | V4.00 | |
| OK | UH-7000 | V1.08 | V1.02 | |
| OK | US-366 | V1.03 | V1.04 | |
| OK | US-1200 | V1.00 | V1.03rc1 | |
| OK | SERIES 102i | V1.02 | V1.00 | |
| OK | SERIES 208i | V1.02 | V1.00 |
| Result | Product | Firmware | Software / Driver | Note |
| OK | DR-05X | V1.10 | V1.00 | |
| OK | DR-07X | V1.10 | V1.00 | |
| OK | DR-40X | V1.01 | V1.00 |
| Result | Product | Firmware | Settings Panel / Driver | Note |
| OK | Model 24 | V1.32 | V1.10 |
| Result | Product | Firmware | Software / Driver | Note |
| OK | MX-8A | V1.02 | - | |
| OK | 202MKVII | - | - |
Links |
|
|---|---|
|
202MKVII |
|
Celesonic US-20x20 |
|
DR-05X |
|
DR-07X |
|
DR-40X |
|
iXR |
|
MiNiSTUDIO CREATOR US-42 |
|
MiNiSTUDIO PERSONAL US-32 |
|
Model 24 |
|
MX-8A |
|
SERIES 102i |
|
SERIES 208i |
|
TASCAM TRACKPACK 2x2 |
|
TASCAM TRACKPACK 4x4 |
|
TASCAM TRACKPACK iXR |
|
UH-7000 |
|
US-100 |
|
US-1200 |
|
US-122MKII |
|
US-125M |
|
US-144MKII |
|
US-16x08 |
|
US-1800 |
|
US-1x2 |
|
US-2x2 |
|
US-366 |
|
US-4x4 |
INT
