MM-4D/IN-X
4-Channel Mic / Line Input Dante Converter with built-in DSP Mixer
Built-in DSP 4 mic/line input Dante converter to respond to various needs of contractor market and professional audio scene.
- Power : PoE class 0, TASCAM PS-P1220E
- Power consumption : 7.5W
- Dimensions : 214(W) × 44.45(H) × 136.1(D)mm
- Weight : 885g
- 4-channel mic/line input with phantom power (+48v) support (XLR)
- Supports remote mic gain control
- 4 Dante input/output
- Supports PoE (Power over Ethernet)
- Includes a variety of DSP functions for optimal use in different scenes/environments (Output effects, 8 in/4 out matrix mixer)
- 2 types of user control software available for Windows/Mac/iOS/Android devices:
For full control: input/output routing selection, DSP/design/scene settings of the complete system, etc.
For simple control: simple app design for only the necessary functions such as area volume settings, etc. - Half-rack mountable size
- Equipped with signal indicators that monitor line input signals
- MM-4D/IN-X × 1
- Installation brackets × 2
- Owner's Manual (including warranty) × 1
The MM-4D/IN-X is a compact converter that converts 4-channel mic/line input signals into Dante signals. With half the size of a standard 1U rack, the MM-4D/IN-X is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-4D/IN-X supports up to 96kHz/24bit and uses XLR connectors for analog mic/line input.
4 mic / line input, 4 Dante input / output
The MM-4D/IN-X converts 4-channel mic/line input signals into 4-channel Dante output signals. It also supports 4-channel Dante input/output making it possible to use audio sources within an established Dante network.
Phantom power and remote gain control compatible mic preamps
The installed mic preamps support phantom power (+48V) and the input gain can be remote controlled via TASCAM DCP CONNECT software, via Dante or other external controllers.
TASCAM studio quality mic preamps installed
The MM-4D/IN-X has installed two natural-sounding, high grade TASCAM mic preamps made with all the knowledge and experience cultivated through the years in the making of pro audio equipment. Input range covers from -70 dBu to +26 dBu, with equivalent input noise achieving less than -125 dB, and signal-noise ratio over 108 dB.
Compressor, 4 band parametric EQ, auto level, and more effects included
They can be finely adjusted depending on the mic/line equipment used.
Built-in 8 in/4 out matrix mixer
Using the built-in matrix mixer, users can mix up to 8 different sources (4-channel mic/line inputs with 4-channel Dante inputs) and configure the settings on each of the four output zones. The matrix mixer is also equipped with a ducking function and an ambient noise compensator function, which detects the level of environmental sounds and automatically adjusts the input level of the source.
Input/output routing
Flexible routing allows users to choose the output zone of 4 mic/line inputs or the built-in matrix mixer output zone as 4 Dante output. The MM-4D/IN-X can also be used as a simple mic/line input unit by bypassing the matrix mixer.
PoE supported
Power supply can be provided to the unit via PoE (Power over Ethernet).
No need for AC adaptors; power supply construction fees and installation costs can be reduced by using a PoE compatible network switch.
Remote control via control software
Controlling effects or the matrix mixer can be easily done through the dedicated control software; depending on the amount of controls the user needs, there are two types:
- TASCAM DCP CONNECT, designed for system integrators/managers that handle the configuration and settings of an entire system.
- TASCAM EZ CONNECT, designed for end-users and allowing them to use simple controls.
Flexible routing
Routing to each Dante device is easy via Dante controller. Input/output units can be added flexibly to new or already established Dante systems.
Installable according to usage/environment
Units can be easilly installed directly under desks or on walls with the included surface mount adaptors.
Installable according to usage/environment
With the optional rack-mountable shelf AK-RS1, up to two Dante Compact Processor models can be installed in a 19 inch rack space.
Scene preset
Effect parameters, mix levels, input/output routings, etc. settings can be saved as up to 50 different presets by the scene preset function. This function allows switching different presets seamlessly in different environments.
Features at a Glance
- 4-channel mic/line input with phantom power (+48v) support (XLR)
- Supports remote mic gain control
- 4 Dante input/output
- Supports PoE (Power over Ethernet)
- Up to 24bit/96kHz
- Includes a variety of DSP functions for optimal use in different scenes/environments (Output effects, 8 in/4 out matrix mixer)
- Supports Dante daisy chain; this allows two Dante Compact Processor models to be connected without a network switch
- Flexible scene preset function allows to work in different area situations (Up to 50 presets)
- 2 types of user control software available for Windows/Mac/iOS/Android devices:
For full control: input/output routing selection, DSP/design/scene settings of the complete system, etc.
For simple control: simple app design for only the necessary functions such as area volume settings, etc. - Remote control via Dante
- Half-rack mountable size
- Equipped with indicators that show LAN/Dante connection status and sample rate
- Equipped with signal indicators that monitor line input signals
- Configurable reference level (via remote control only)
- Surface rack mountable angles for installation under desks included
- Optional accessories:
AC adapter PS-P1220E for redundant power supply available
Rack-mountable shelf AK-RS1 to install and store two Dante Compact Processor models in a 19 inch rack case
Dante Compact Processor Series - New Upgraded Version 1.04 of Dante Module Firmware Released
Learn MoreDante Compact Processor Series - New Upgraded Version 1.2.0.6 of Dante Module Firmware Released
Learn MoreYou might also like
Spec description
General | |
Formats and channels | 44.1/48/88.2/96kHz,16/24-bit, 4 channels |
Input/output ratings | |
DATA/DATA+PoE connectors | |
Connector | RJ-45 |
Transmission protocol | Dante |
Gigabit Ethernet standard | 1000BASE-T (IEEE 802.3ab) |
Cables | category 5e or faster STP cables |
ANALOG IN connectors | |
Connector | XLR-3-31 (1: GND, 2: HOT, 3: COLD) |
Minimun input level | -70 dBu |
Maximum input level | +26 dBu |
Input impedance | 2.0 kΩ or higher |
Other | |
Power | PoE class 0 TASCAM PS-P1220E AC adapter (sold separately) |
Power consumption | 7.5W |
Dimensions | 214 x 44.45 x 136.1 mm (W x H x D, including protrusions) |
Weight | 885 g |
Operating temperature range | 0°C-40°C |
Included items | Installation brackets, Owner's manual (including warranty) |
Audio performance
MIC IN → DANTE OUT | |
Mic amp EIN (equivalent input noise) | -125 dBu (150Ω, 22kHz LPF+A, JEITA) |
Frequency response | +/-0.5 dB: 20 Hz - 20 kHz(44.1/48kHz sampling frequency, JEITA) +/-0.5 dB: 20 Hz - 40 kHz(88.2/96kHz sampling frequency, JEITA) |
Distortion (THD+N) | 0.003 %(when -1 dBFS input, 44.1/48/88.2/96kHz samplingfrequency, JEITA) |
S/N ratio | 108 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
Crosstalk | 100 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
Dynamic range | 108 dB (44.1/48/88.2/96kHz sampling frequency, JEITA) |
Note: JEITA indicates compliance with JEITA CP-2150
MM-4D/IN, ML-4D/OUT, MM-2D, AE-4D comparison chart
Input channels
Products | Analog (Mic/Line) | Digital (AES/EBU) | Digital (Dante) |
MM-4D/IN-X | 4ch | - | 4ch |
MM-4D/IN-E | 4ch | - | 4ch |
ML-4D/OUT-X | - | - | 4ch |
ML-4D/OUT-E | - | - | 4ch |
MM-2D-X | 2ch | - | 4ch |
MM-2D-E | 2ch | - | 4ch |
AE-4D | - | 4ch | 4ch |
Output channels
Products | Analog (Line) | Digital (AES/EBU) | Digital (Dante) |
MM-4D/IN-X | - | - | 4ch |
MM-4D/IN-E | - | - | 4ch |
ML-4D/OUT-X | 4ch | - | 4ch |
ML-4D/OUT-E | 4ch | - | 4ch |
MM-2D-X | 2ch | - | 4ch |
MM-2D-E | 2ch | - | 4ch |
AE-4D | - | 4ch | 4ch |
Input/Output/GPI connectors
Products | Analog | Digital (AES/EBU) | Digital (Dante) | GPI |
MM-4D/IN-X | XLR | - | RJ45 | - |
MM-4D/IN-E | Euroblock | - | RJ45 | Euroblock |
ML-4D/OUT-X | XLR | - | RJ45 | - |
ML-4D/OUT-E | Euroblock | - | RJ45 | Euroblock |
MM-2D-X | XLR | - | RJ45 | - |
MM-2D-E | Euroblock | - | RJ45 | Euroblock |
AE-4D | - | XLR | RJ45 | - |
Information
Latest version info | |
Firmware | V1.04 |
Dante Module Firmware | V1.2.0.6 |
- In firmware V1.03 and earlier, when the total amount of packet data sent/received exceeded 2 GB due to prolonged operation after power-on, the network connection would become unavailable or the network would be disconnected.
This issue has been fixed in V1.04.
- In V1.2.0.5, remote connection could still become interrupted on networks where multicast was used. This problem was confirmed and fixed.
Spec
RS-232C/ETHERNET Protocol Specifications | 04-02-2019 | 653.7 KB |
---|---|---|
MM-4D/IN-X Specifications | 02-05-2019 | 360.5 KB |
AK-RS1 CAD outline(PDF) | 02-05-2019 | 19.2 KB |
AK-RS1 CAD outline(DXF/PDF) | 02-05-2019 | 57.8 KB |
CAD outline (PDF) | 02-05-2019 | 82.8 KB |
CAD outline(DXF/PDF) | 02-05-2019 | 0.0 KB |
Manuals
Owner's Manual Addendum V1.1.0 | 10-07-2019 | 171.4 KB |
---|---|---|
Owner's Manual (English, Français, Español, Deutsch, Italiano, Japanese) | 02-07-2019 | 2.4 MB |
Documents
Release Notes (English) | 12-18-2023 | 1.5 KB |
---|---|---|
Dante Module Firmware Release Notes (English) | 04-27-2022 | 1.9 KB |
Firmware update procedures (English) | 12-25-2019 | 879.8 KB |
Dante Module Firmware Update Procedures (English) | 10-07-2019 | 818.4 KB |
Firmware
Firmware V1.04 for Windows | 12-18-2023 | 22.9 MB |
---|---|---|
Firmware V1.04 for macOS X | 12-18-2023 | 23.5 MB |
Dante Module Firmware V1.2.0.6 | 04-27-2022 | 4.3 MB |
Dante Module Firmware V1.2.0.5 | 10-22-2020 | 4.3 MB |
Software
TASCAM DCP CONNECT | 12-25-2019 | |
---|---|---|
TASCAM EZ CONNECT | 04-05-2019 | 94.0 B |
TASCAM DCP CONNECT | 04-05-2019 | 95.0 B |
TASCAM EZ CONNECT | 11-06-2018 |
Catalogs
TASCAM System Design Guide for Audio Installation, 2024 | 01-18-2024 | 6.6 MB |
---|---|---|
MM-4D/IN-E, MM-4D/IN-X Leaflet | 02-05-2019 | 931.9 KB |