SB-16D
16-in/16-out Dante Stage Box
16-in/16-out Dante analog converter with built-in 32-bit ADC & Class 1 HDIA mic preamps. Controllable with TASCAM IO Control app or with TASCAM Sonicview series.
- Dimensions (The original foot is attached) : 454(W) x 140(H) x 179.6(D) mm
- Dimensions (Rackmount angle is attached) : 482.8(W) x 132(H) x 120(D) mm
- Weight : 4.5kg
- Power consumption : 44W
- 16 in/16 out Dante enabled stage box with redundancy
- 16 XLR mic/line inputs with +48 phantom power and SIG OL LED input signal/overload indicators
- 16 XLR line outputs with SIG OL LED output signal indicators
- Up to 96 kHz sampling and 32-bit precision
- Supports both floor installation and 3U rack mounting
- Fully controllable from connected TASCAM Sonicview mixers
- Remote control and offline editing using TASCAM IO Control app for macOS, Windows, and iPadOS
- SB-16D x 1
- Power cord (JAPAN USA/EUROPE/OCEANIA) x 3
- Rack mount angle(mounting screw)set x 1
- Rack mount screw kit x 1
- TASCAM ID registration guide x 1
- Owner's Manual with warranty x 1
Top Quality Audio I/O for Dante Networks
Offering the same performance and hardware quality as TASCAM Sonicview recording and live mixers, TASCAM SB-16D Dante-networked 16-in/16-out stage boxes offer all the advantages of Dante networking, combined with seamless integration with TASCAM Sonicview recording mixers. The stage boxes can be used as a floor stage box or rack mounted, and multiple stage boxes can be used simultaneously in a Dante network.
Seamless integration : Remote Gain Control
When a SB-16D stage box is connected to a TASCAM Sonicview 16XP or 24XP recording mixer, microphone gain can be remotely controlled from the mixing console, and all SB-16D I/O comes up on the TASCAM Sonicview VIEW touch screens for hassle-free ease of use.
A Full Complement of I/O with the Features You Need
Easily accommodate large ensembles and extensive installed Dante systems using the SB-16D's 16 XLR mic/line inputs and 16 XLR line outputs. Need more I/O? Simply network multiple SB-16Ds.
The mic/line inputs are extremely quiet, achieving a -128 dBu EIN with a +32 dBu maximum input level. Each input channel has +48V phantom power and an SIG OL LED for input-level monitoring. Each line output also is equipped with SIG OL LEDs.
Class 1 HDIA Mic Preamps and 32-bit ADCs for Best-in-Class Sound
As in TASCAM Sonicview recording mixers, each SB-16D microphone input feeds a TASCAM Class 1 HDIA (High Definition Instrumentation Architecture) preamp—the finest mic preamp TASCAM has ever made. Thanks to an instrumentation amplifier with extremely good noise characteristics in the first stage, Class 1 HDIA microphone preamps exhibit excellent EIN, signal-to-noise ratio, distortion ratio, and frequency response. The mic inputs can accept up to +32 dBu signals, providing plenty of headroom for sudden level increases.
As with TASCAM Sonicview recording mixers, the SB-16D uses 32-bit analog-to-digital converters and a 96 kHz sampling frequency. Repeated internal and external evaluations were conducted to fine-tune the SB-16D, ensuring best-in-class sound that will never disappoint.
Additional Features
Equipped GPIO
The SB-16D is equipped with 8-in/8-out GPIOs, which expand to 16-in/16-out GPIOs when connected to a TASCAM Sonicview recording mixer, facilitating parallel control.
The SB-16D supports Dante Domain Manager in addition to AES67 and SMPTE ST 2110 interoperability. Two Dante ports equipped with etherCON-compatible Dante connectors enable redundant streams with robust connections. For additional system reliability, a DC power input is provided that supports a redundant power supply (not included).
Flexible Positioning for Floor and Rack Applications
Whether you want a networked floor box for stage use, or rack-mounted inputs for recording and broadcast studios and commercial installs, the SB-16D provides the flexibility you need. It can be 3U rack-mounted with the included brackets, which offer two angle options. Mount the jack panel on the front of the rack and take advantage of the SB-16D's cable hole to conveniently and safely route connected cables in the back.
Large rubber feet maintain stability, even with cables connected, when the SB-16D is used as a floor box. Multiple stage boxes can be stacked for ease of transportation and stability during installation. A handle makes the SB-16D easy to carry.
TASCAM IO Control Remote Control App
Whether your SB-16D is onstage, backstage, in a control room, or in an equipment closet, you're always in full control with the free TASCAM IO Control software for macOS, Windows, and iPadOS. Manage your stage box from virtually anywhere in the venue, even when the SB-16D is used in standalone mode.
Features at a Glance
- 16 in/16 out Dante enabled stage box with redundancy
- 16 XLR mic/line inputs with +48 phantom power and SIG OL LED input signal/overload indicators
- 16 XLR line outputs with SIG OL LED output signal indicators
- Up to 96 kHz sampling and 32-bit precision
- Supports both floor installation and 3U rack mounting
- Fully controllable from connected TASCAM Sonicview mixers
- Remote control and offline editing using TASCAM IO Control app for macOS, Windows, and iPadOS
- Equipped with DC input and supports redundant power supply (DC power supply not included)
- Equipped with 8 in/8 out expansion GPIO terminals, expandable to 16 in/16 out when connected to a TASCAM Sonicview mixer
- Switchable reference level
- Equipped with etherCON compatible connectors as Dante connection
- Dante Domain Manager support
- AES67 interoperability
- SMPTE ST 2110 interoperability
Announcement Regarding V1.6.0 Firmware for TASCAM Sonicview Series and V1.20 Firmware for SB-16D
Learn MoreTASCAM To Showcase the Sonicview Digital Recording and Mixing Consoles During NAMM
Learn MoreYou might also like
Spec description
Analog Audio Inputs and Outputs | |
MIC/LINE INPUTS (1-16) | |
CONNECTOR | XLR-3-31 type (1: GND, 2: HOT, 3: COLD) |
Input Impedance | 5.0kΩ and more |
Max Input Level | +32dBu (TRIM Min, PAD: ON), +12dBu (TRIM Min, PAD: OFF) |
Min Input Level | -42dBu (TRIM Max, PAD: ON), -62dBu (TRIM Max, PAD: OFF) |
Phantom Power | +48V available |
LINE OUTPUTS (1-16) | |
CONNECTOR | XLR-3-32 type (1: GND, 2: HOT, 3: COLD) |
Nominal Output Level | +6dBu (D.ref: -9dB) +4dBu (D.ref: -14dB, -16dB) +4dBu or 0dBu (D.ref: -18dB, -20dB) |
Max Output Level | +15dBu(D.ref.: -9dBFS, A.ref: +6dBu) +18dBu(D.ref.: -14dBFS, A.ref: +4dBu) +20dBu(D.ref.: -16dBFS, A.ref: +4dBu) +18dBu(D.ref.: -18dBFS, A.ref: 0dBu) +20dBu(D.ref.: -20dBFS, A.ref: 0dBu) +22dBu(D.ref.: -18dBFS, A.ref: +4dBu) +24dBu(D.ref.: -20dBFS, A.ref: +4dBu) *D.ref.: Digital Reference Level, A.ref.: Analog Reference Level *0dBu=0.775Vrms |
Output Impedance | 100Ω or less |
Digital Audio Inputs and Outputs | |
Dante(PRIMARY/SECONDARY) | |
CONNECTOR | etherCON Cat5e compatible |
Number of channels | 64 channels (48 kHz), 32 channels (96 kHz) |
Ethernet | 1000BASE T(IEEE802.3ab) |
Cable | CAT5e STP |
Supports redundant mode and Switched mode | |
Other Inputs and Outputs | |
GPIO | |
CONNECTOR | D-sub 25pin (8in/8out, female, inch) |
Input circuit | pull up (5V) |
Output circuit | Open corrector |
Output impedance | 10Ω |
Withstand Voltage | 20V |
Maximum current | 35mA |
+5V Maximum supply current | 50mA |
General | |
Dimensions | 454(W) x 140 (H) x 179.6 (D) mm (The original foot is attached) 482.8(W) x 132(H) x 120(D) mm (Rackmount angle is attached) 17.88(W) x 5.52(H) x 7.08(D) inch (The original foot is attached) 19.01(W) x 5.20(H) x 4.72(D) inch (Rackmount angle is attached) |
Weight | 4.5kg / 9.93 lb |
AC Power Supply | AC100V 240V 50/60 Hz |
DC Power Supply | DC11V/4A - 27V/2A |
Power Consumption | 44W |
Operating Temperatures | 0 - 40 ℃ |
Control Software | TASCAM IO CONTROL |
Supported Operating System | |
Windows | Windows 11 64 bit, Windows 10 64 bit |
Mac | macOS Monterey(12), macOS Big Sur(11), macOS Catalina(10.15) |
iOS | iPadOS 15, iPadOS 14 |
Included Items | SB 16D x1 Power Code (JAPAN USA/EUROPE/OCEANIA) x1 Rackmount angle (screw) set x1 Rackmount angle screw kit x1 TASCAM ID registration guide x1 Owner's manual with warranty x1 |
Audio Performance
MIC PRE AMP EIN (Equivalent Input Noise) | -128dBu or less |
Distortion | 0.002% and less (MIC/LINE > Dante, +4dBu Inputs, PAD=OFF, TRIM MIN, JEITA) 0.002% and less (DANTE > LINE OUTPUT, 0dBFS Outputs, JEITA) |
Frequency characteristic | |
20Hz - 20kHz | +0dB、-0.5dB(48kHz) (MIC/LINE > LINE OUTPUT, JEITA) |
20Hz - 40kHz | +0dB、-1.0dB(96kHz) (MIC/LINE > LINE OUTPUT, JEITA) |
20Hz - 20kHz | +0dB、-0.5dB(48kHz) (DANTE IN > LINE OUTPUT, JEITA) |
20Hz - 40kHz | +0dB、-1.0dB(96kHz) (DANTE IN > LINE OUTPUT, JEITA) |
Crosstalk | 100dB or more (MIC/LINE > OUTPUT, 1kHz Sine wave, JEITA) |
Dynamic range | 110dB or more (MIC/LINE > DANTE, PAD=OFF, TRIM MIN, D. 20dBFS, JEITA) 111dB or more (DANTE IN > LINE OUTPUT, Sampling rate: 48kHz) 112dB or more (DANTE IN > LINE OUTPUT, Sampling rate: 96kHz) |
*0dBu=0.775Vrms
*D.ref: Digital Reference Level
*Specifications and appearance are subject to change without notice for improvement.
Information
Latest version info
TASCAM Sonicview 24 / TASCAM Sonicview 16
Firmware | V1.7.0 |
Dante module firmware (Dante Brooklyn II) | V1.0.2 |
Dante module firmware (Dante Brooklyn 3) | V1.0.2 |
TASCAM Sonicview USB for Windows | V1.0.1 |
TASCAM Sonicview Control for Windows | V1.6.0 |
TASCAM Sonicview Control for Mac | V1.6.0 |
TASCAM Sonicview Control for iPadOS | V1.6.0 |
SB-16D
Firmware | V1.20 |
Dante module firmware (Dante Brooklyn II) | V1.0.0 |
Dante module firmware (Dante Brooklyn 3) | V1.0.1 |
TASCAM IO CONTROL for Windows | V1.1.1 |
TASCAM IO CONTROL for Mac | V1.1.1 |
TASCAM IO CONTROL for iPadOS | V1.1.1 |
IF-MTR32
Firmware | V1.12 |
- When an SB-16D was mounted to the Sonicview, regardless of the settings, all SB-16D GPIO-OUTSs would turn to OPEN. This has been fixed.
- Dante settings were not initialized when Factory Reset was performed. This has been fixed.
- Operation stability has been improved.
- The following changes have been added to the GPIO Settings screen:
IN) "Local / Open - Mute " settings have been changed to "Local / Closed - Unmute"
OUT) "Local / Mute - Open " settings have been changed to "Local / Unmute - Closed" - Operation stability has been improved.
Notices About Products
Spec
ETHERNET Protocol Specifications (English) | 07-27-2023 | 880.4 KB |
---|---|---|
Specifications (English) | 01-11-2023 | 685.9 KB |
CAD outline (DXF/PDF) | 09-01-2022 | 13.5 MB |
CAD outline (PDF) | 09-01-2022 | 5.5 MB |
Manuals
TASCAM IO CONTROL Mode D'EMPLOI (Français) V1.0.0 | 08-17-2023 | 5.5 MB |
---|---|---|
TASCAM IO CONTROL Bedienungsanleitung(Deutsch) V1.0.0 | 08-17-2023 | 2.5 MB |
TASCAM IO CONTROL MANUALE DI ISTRUZIONI(Italiano) V1.0.0 | 08-17-2023 | 5.6 MB |
TASCAM IO CONTROL MANUAL DE INSTRUCCIONES(Español) V1.0.0 | 08-17-2023 | 5.6 MB |
Owner's Manual (English, Français, Español, Deutsch, Italiano, 日本語) | 06-02-2023 | 15.2 MB |
TASCAM IO CONTROL User's Manual V1.0.0 | 03-17-2023 | 5.4 MB |
Documents
Release Note | 04-04-2024 | 5.3 KB |
---|---|---|
TASCAM IO CONTROL Release Notes (English) | 04-04-2024 | 4.9 KB |
Dante module firmware update procedures (English) | 11-14-2023 | 1.3 MB |
Firmware update procedures (English) | 04-19-2023 | 344.1 KB |
Firmware
TASCAM Sonicview Series Update Files | 10-23-2024 | 677.2 MB |
---|---|---|
Firmware V1.20 for Windows | 04-04-2024 | 22.6 MB |
Firmware V1.20 for Mac | 04-04-2024 | 33.5 MB |
Software
TASCAM IO CONTROL V1.1.1 for iPadOS | 04-04-2024 | |
---|---|---|
TASCAM IO CONTROL V1.1.1 for Mac | 04-04-2024 | 48.0 MB |
TASCAM IO CONTROL V1.1.1 for Windows | 04-04-2024 | 36.1 MB |
Catalogs
TASCAM System Design Guide for Audio Installation, 2024 | 01-18-2024 | 6.6 MB |
---|