DA-3000SD
2-Channel DSD/PCM Master Recorder and AD/DA Converter
The TASCAM DA-3000SD combines a top-of-the-line reference-grade master recorder and AD converter for high-sample rate musically correct recording. Utilizing premium components, the DA-3000SD carries on the legacy as the industry standard in professional master recording and top level AD/DA conversion for recording engineers.
- Dimensions : 483(W) × 45(H) × 305(D) mm
- Weight : 4.1kg
- PCM recording up to 192kHz, DSD recording up to 5.6MHz
- AD/DA direct mode can be used as a phase coherent pure standalone AD/DA converter
- Rich input and output selection: analog XLR, RCA; PCM digital S/PDIF, AES/EBU, DSD SDIF-3 and DSD-raw
- Equipped with high-precision TCXO (less than 1ppm)
- DA-3000SD x 1
- Power cord (3P) x 1
- RC-10 (Wireless remote controller) x 1
- Lithium coin cell battery (CR2025) x 1
- A rack-mounting screw kit x 1
- Owner's Manual (including warranty) x 1
Professional Stereo Master Recorder with Superior AD/DA Converters
Following in its critically acclaimed predecessors footsteps, the DA-3000SD is a must-have master recorder and professional grade monitoring device in a single rack mountable unit.
Bouncing a recording in a DAW alone cannot capture the quality afforded by the DA-3000SD as a master recorder. When used as an AD/DA conversion unit in a DAW production environment, noise free superior monitoring is second-to-none as the clarity and depth of audio is enhanced and allowed to shine.
Masterful Audio with PCM 192kHz, DSD 2.8/5.6MHz Recording
For recording, the DA-3000SD supports audio capture at 192 kHz for PCM as well as 2.8 and 5.6 MHz for DSD, the highest quality recording format commercially available. Based on project needs, users can select which recording method best matches the music’s characteristics and save the settings. Multiple units can be synchronized for sample-accurate recording and playback, allowing for the creation of a DSD multitrack recording environment. Recording directly to SD card media makes transportation and storage of sessions simple and easy-to-handle.
Utilizing High-Quality Audio Circuitry for AD/DA Conversion
An EI core transformer with separate windings for the digital and analog circuits is used in the power supply section, while the output audio circuit has a dual monaural configuration with two high-quality mono circuits to achieve an exceptional sonic profile. Additionally, all stages of the audio circuits have a balanced configuration to reduce noise on both input and output paths. Equipped with a TCXO (temperature compensated crystal oscillator), the DA-3000SD’s clock generator boasts an accuracy of +/- 1ppm for digital audio processing with no jitter.
Wide range of input and output terminals
The unit is equipped with a diverse selection of input and output terminals for connection to a variety of studio equipment such as audio interfaces, microphone preamplifiers, dynamic processors, and more. Analog I/O ports are provided via XLR and RCA terminals, while PCM digital connectivity is provided through S/PDIF, RCA, coaxial, and AES/EBU connectors. DSD digital connections are handled through the use of BNC SDIF-3 terminals.
As a Portable High-Definition DA Converter
A highly portable piece of gear, the DA-3000SD can fit in a 1U backspace and be toted from studio to studio for detailed and reliable monitoring in any environment. Plus, with its WORD clock capability, the unit can double as a high-precision master clock generator, or sync it to an external clocking device for musically correct pure phase coherent audio.
As an A/D Converter/Recorder for Mastering
By sending stereo master from a DAW and recording them with the DA-3000SD, you can capture the master sound source at a higher resolution than possible with a DAW bounce alone. To insert vintage or other outboard equipment during the mastering process, place the DA-3000SD in the signal chain after the external hardware to capture the audio coloration in all its full, high-definition beauty.
As a DSD Multitrack Recorder
Both recording and playback synchronization is possible by cascading multiple units, enabling a DSD multitrack environment. By connecting eight DA-3000SD’s, users can record up to 16 tracks at a time.
Additional Features
Auto File Save Function Offers Safety and Security
TASCAM's unique Auto File Save function prevents data loss in the unforeseen event of power loss. Recorded data is automatically saved every 25 seconds, which minimizes loss when faced within unexpected hurdles.
A Simple User Interface With Enhanced Operability
The 128 x 64-dot OLED display provides quick access to the most needed information, while the 24-dot LED level meter allows for constant monitoring of signal at all times.
Full Balanced Circuit with Dual Monaural Configuration
The output circuitry uses a dual monaural configuration that eliminates interference between the left and right channels, maximizing the performance of the DA-3000SD to achieve unrivaled sound quality. The D/A conversion is handled by the renowned BurrBrown PCM1795 converters, one for each channel. Other components include low-impedance capacitors and low-noise, high-precision resistors. Meticulous care was taken in selecting parts to bring the highest quality sound to the DA-3000SD.
Top-Tier Audio Quality Through High-Precision TCXO and Power Supply
In the power supply section, the EI core transformer has separate windings for both digital circuitry and operation paths for the analog audio circuits, reducing noise contamination and enabling higher-quality signals. Additionally, the clock generator is equipped with a TCXO (temperature compensated crystal oscillator) boasting an accuracy of +/- 1ppm, providing flawless audio quality plus precise and reliable clocking.
A Fanless Design for Noiseless Monitoring
Lacking a fan, the DA-3000SD achieves its high functionality in a comfortable monitoring environment without the distraction of unwanted noise.
Features at a Glance
- PCM recording up to 192kHz, DSD recording up to 5.6MHz
- AD/DA direct mode can be used as a phase coherent pure standalone AD/DA converter
- Rich input and output selection: analog XLR, RCA; PCM digital S/PDIF, AES/EBUDSD SDIF-3 and DSD-raw
- Equipped with high-precision TCXO (less than 1ppm)
Other Features
- Premium isolated BurrBrown PCM1795 converters, one for each channel
- Cascade function supported recording 2 mono files
- Automatic file closing function to prevent the loss of recorded data if the batteries run out.
- WORD IN/OUT/THRU
- Support SDXC (up to 512G)
- Highly visible 24-dot level meter
- Equipped with 128x64 dots OLED display
- Mark function
- Panel Lock function
- Dedicated USB keyboard terminal for folder/file name input and external control
- Oscillator function
- Outputs volume control
- USB memory for playback or mutual copying with SD cards
- Supports wireless remote control (RC-10)
- 1U rack-mountable
TASCAM Announces the DA-3000SD 2-channel DSD/PCM Master Recorder with AD/DA Converter
Learn MoreYou might also like
Spec description
Supported Media | |
SD | SDHC card (4GB~32GB), SDXC card (64GB~512GB) Media ejection method: Push-push type |
USB | USB flash drive *Only playback and file copying with SD card are supported. |
Recording and Playback Format | |
PCM | 44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz 16bit / 24bit |
Recording | BWF (.wav) |
Playback | BWF (.wav), WAV (.wav) |
DSD | 2.8224 / 5.6448 MHz |
Recording and Playback | DSDIFF (.dff), DSF (.dsf) |
Number of channels | 2ch (Stereo/Mono x2) |
Analog Inputs | |
Unbalance | |
Connector | RCA pin jacks |
Nominal Input Level | –10dBV |
Max Input Level | +6dBV |
Minimum input level | –22dBV |
Input impedance | 22kΩ or more |
Balance | |
Connector | XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD) |
Nominal Input Level | +4dBu +6dBu (at Max Input Level set to +15dBu) |
Max Input Level | +15dBu, +18dBu, +20dBu, +22dBu, +24dBu |
Minimum input level | -8dBu -6dBu (at Max Input Level set to +15dBu) |
Input Impedance | 10kΩ or more |
Analog Output | |
Unbalance | |
Connector | RCA pin jacks |
Nominal Output Level | –10dBV |
Max Output Level | +6dBV |
Output Impedance | 200Ω or less |
Balance | |
Connector | XLR-3-32 equivalent (1: GND, 2: HOT, 3: COLD) |
Nominal Output Level | +4dBu +6dBu (at Max Input Level set +15dBu) |
Max Output Level | +15dBu, +18dBu, +20dBu, +22dBu, +24dBu |
Output Impedance | 100Ω or less |
Digital Input | |
S/PDIF, CASCADE | Unbalance |
Connector | RCA pin jacks |
Format | IEC60958-3 (S/PDIF) |
Input Frequency | |
SRC OFF | 44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz |
SRC ON | 32~216kHz |
Allowable Frequency Deviation | +/-100ppm (SRC OFF) |
AES/EBU | Balance |
Connector | XLR-3-31 equivalent (1: GND, 2: HOT, 3: COLD) |
Format | AES3-2003 / IEC60958-4 (AES/EBU) |
Input Frequency | |
SRC OFF | 44.1 / 48 / 88.2 / 96 / 176.4 / 192kHz |
SRC ON | 32~216kHz |
Allowable Frequency Deviation | +/-100ppm (SRC OFF) |
SDIF-3 | Unbalance |
Connector | BNC Connector x 2 (L/R) |
Format | SONY SDIF-3 / DSD-raw |
Clock Frequency | 44.1kHz |
Digital Output | |
S/PDIF, CASCADE | Unbalance |
Connector | RCA pin jacks |
Format | IEC60958-3 (S/PDIF) |
AES/EBU | Balance |
Connector | XLR-3-32equivalent (1: GND, 2: HOT, 3: COLD) |
Format | AES3-2003 / IEC60958-4 (AES/EBU) |
SDIF-3 | Unbalance |
Connector | BNC Connector × 2 (L/R) |
Format | SONY SDIF-3 / DSD-raw |
Clock Frequency | 44.1kHz |
WORD SYNC IN | |
Connector | BNC Connector |
Input level | 5V TTL equivalent |
Input Impedance | 75Ω +/-10% |
Input Frequency | 44.1k / 48k / 88.2k / 96k / 176.4k / 192k Hz |
Allowable Frequency Deviation | +/-100ppm |
WORD SYNC THRU/OUT | |
Connector | BNC Connector |
Output Level | 5V TTL equivalent |
Output Impedance | 75Ω +/-10% |
Output Frequency | 44.1k / 48k / 88.2k / 96k / 176.4k / 192k Hz |
Frequency Stability | +/-1ppmor less (Ta=25˚C) |
USB | |
PLAY/COPY | |
Connector | USB Type-A |
Protocol | USB 2.0 HIGH SPEED (480Mbps) |
Power Rating | DC 5.0V, 0.5A |
REMOTE | |
Connector | USB Type-A |
Protocol | USB 1.1 FULL SPEED (12Mbps) |
Power Rating | DC 5.0V, 0.2A |
Control Input/Output | |
Infrared receiver | RC-10 Supported (Wireless Remote Controller) |
Headphone Output | |
Connector | 6.3mm (1/4') Stereo Phone Jack |
Max Output | 45mW + 45mW (32Ω load, Distortion: 0.1%) |
Power Supply | AC120V (for North America), AC230V |
Power Consumption | 24W |
Dimensions | 483(W) × 45(H) × 305(D) mm 19.02(W) × 1.78(H) × 12.01(D) inch |
Weight | 4.1 kg / 9.04 lb |
Temperature rating | 0~+40˚C |
Bundled Items | DA-3000SD x1 Power cord (3P) x1 RC-10(Wireless Remote Controller) x1 Lithium coin cell battery (CR2025) x1 A rack-mounting screw kit x1 Owner's Manual (including warranty) x1 |
* 0 dBu = 0.775 Vrms
* 0 dBV = 1 Vrms
Audio performance
Recording | |
Frequency Response | |
PCM | 20~20kHz +0.1dB/-0.5dB (Fs=44.1k/48kHz, JEITA) 20~40kHz +0.1dB/-1dB (Fs=88.2k/96kHz, JEITA) 20~80kHz +0.1dB/-6dB (Fs=176.4k/192kHz, JEITA) |
DSD | 20~50kHz +0.1dB/-3dB (DSD, JEITA) 20~100kHz +0.1dB/-12dB (DSD, JEITA) |
Distortion | 0.003% or less (Ref: -16dB/BALANCED, JEITA) 0.005% or less (UNBALANCED, JEITA) |
S/N Ratio | |
PCM (24bit) | 113dB or more (Ref: -20dB/BALANCED, JEITA) 111dB or more (UNBALANCED, JEITA) |
DSD | 106dB or more (Ref: -20dB/BALANCED, AES-17 20k LPF) 104dB or more (UNBALANCED, AES-17 20k LPF) |
Crosstalk (1kHz) | 105dB or more (JEITA) |
Playback | |
Frequency Response | |
PCM | 20~20kHz +/-0.1dB (Fs=44.1k/48kHz, JEITA) 20~40kHz +0.1dB/-0.3dB (Fs=88.2k/96kHz, JEITA) 20~80kHz +0.1dB/-3dB (Fs=176.4k/192kHz, JEITA) |
DSD | 20~50kHz +0.1dB/-3dB (DSD, JEITA) 20~100kHz +0.1dB/-12dB (DSD, JEITA) |
Distortion | 0.003% or less (Ref: -16dB/BALANCED, JEITA) 0.001% or less (UNBALANCED, JEITA) |
S/N Ratio | |
PCM | 118dB or more (Ref: -20dB/BALANCED, JEITA) 116dB or more (UNBALANCED, JEITA) |
DSD | 116dB or more (Ref: -20dB/BALANCED, AES-17 20k LPF) 114dB or more (UNBALANCED, AES-17 20k LPF) |
About Recording Time
Recording Mode (Settings) | SD Card (1GB) |
||
PCM | WAV-16 bit | 44.1kHz | 90min. |
48kHz | 85min. | ||
88.2kHz | 45min. | ||
96kHz | 42min. | ||
176.4kHz | 22min. | ||
192kHz | 21min. | ||
WAV-24 bit | 44.1kHz | 60min. | |
48kHz | 55min. | ||
88.2kHz | 30min. | ||
96kHz | 25min. | ||
176.4kHz | 15min. | ||
192kHz | 13min. | ||
DSD | DSD | 2.8MHz | 22min. |
DSDIFF | 5.6MHz | 11min. |
Spec
Specifications (English) | 08-27-2024 | 626.5 KB |
---|---|---|
CAD outline (DXF/PDF) | 08-27-2024 | 652.3 KB |
CAD outline (PDF) | 08-27-2024 | 162.5 KB |
Manuals
Owner's Manual (English) | 08-27-2024 | 2.6 MB |
---|
Supported Media / Other
USB Supported Media | 09-09-2024 | 77.3 KB |
---|---|---|
SD Supported Media | 08-22-2024 | 130.0 KB |