CD-RW901MKII
CD Recorder/Player
Unique and powerful features offer professional functionality, quality, and control.
This model has been discontinued.
This model has been discontinued. Check CD-RW900SX as your alternative option.
Enhanced CD recorder unit and playback functions that meet professional level demands
Various useful functions have been added to the CD recorder unit for more versatility. For the CD drive, a TEAC-manufactured drive that is both high in durability and reliability is utilized.
The drive can perform finely-tuned response and gapless continuous operation when updating tracks during recording due to its specially-designed firmware, a feature that would be impossible with standard computer drives.
Other features include rich playback functions and a high level of audio performance that enable the device to be used as professional-level CD player. The audio circuit is also equipped with high level design and components, with a high-spec frequency response of 20 Hz-20 kHz +/-0.8dB.
CD-RW901MKII: developed for studio mastering and broadcasting stations
The CD-RW901MKII, being a superior model, was developed by reinforcing the analogue input and output terminal of the CD-RW900MKII in addition to implementing external control terminals.
Long-run continuous recording (overlap recording) is now made possible by connecting multiple CD-RW901MKIIs. The ISRC/RID code display function allows the CD-RW901MKII to also be used as a recorder/player for checking in a mastering studio.
The CD-RW900MKII is perfect for professional acoustic settings such as PA and sound reinforcement, and the CD-RW901MKII is an optimal device to be used within professional acoustic settings like mastering studios and broadcasting stations.
Both devices could be enjoyed for many years in their respective environment.
CD Recorders that meets the demands of professionals
Both the left and right analog inputs have their own analog input gain controls. In addition, the digital input can be controlled for optimal recording levels from a digital source.
The CD-RW901MKII has a variety of track division functions to make recording simpler. Additionally, a rec-mute function can insert silence between tracks.
Automatic Track Division
A track marker can be created based on the input level, adding a new track when the input falls below a specified level (from –24 to –72dB).
Time Track Division
Time-based track creation can be set every 1-10 minutes. This method is preferred in some applications like conference recording, when there is no gap between segments like there is when recording music.
Manual Track Division
A new track can be written manually by pressing the Record key while the unit is in record mode.
Comprehensive Playback Features Make It the Ideal Professional CD Player
Even if you don't need to record every day, the CD-RW901MKII makes excellent CD player. Functions including auto-cue, auto-ready, pitch control, power-on playback, and fade-in/fade-out playback are provided. It is also possible to control the transport via a P/S2 keyboard (sold separately).
The new transport was designed for audio use – not a re-packaged computer drive. The tray-loading design provides a stable platter to minimize errors while writing the disc. Improved firmware allows the transport to write track markers without a gap, for seamless continuous live recordings.
Unbalanced analog and S/PDIF coaxial and optical connections are provided for connection flexibility.
A RAM buffer stores audio data in memory to ensure smooth playback, even if shock or vibration lasts for up to four seconds.
The CD-RW901MKII: For More Demanding Installations
The ISRC (International Standard recording Code) written during mastering can be displayed. The CD-RW901mkII can check the data on a master disk after mastering. It can also display the RID (Recorder Identification Code).
The RS-232C serial and 15-pin parallel terminals make it possible control the recorders from various master controllers. It can be used with a fader-start signal in a broadcasting station, or with a centralized control terminal in a public facility.
Balanced analog XLR inputs and outputs are provided for use with pro equipment or long signal runs. Balanced AES/EBU is also included for use with digital mixers, processors, and processing.
Continuous recording is supported when using two CD-RW901MKIIs connected through their parallel ports. A selectable overlap of 30, 60, or 90 seconds can be switched on for the next recorder to find a better edit point.
Features at a Glance
- Independent input level controls provides serious level control
- Supported media: CD-R, CD-R-DA, CD-RW, CD-RW-DA
- High speed CD-RW Supports
- CD drive supports playback of CD-DA and Data-CD
- OPC (optimum power control) function: Adjusting the laser power for each disc type
- Fade-in/Fade-out recording function (1 to 30 seconds, 1 seconds increments)
- Sync recording function: Automatically start/stop recording at a preset level (–24dB to –72dB, 6dB increments)
- Digital volume for adjusting recording level seriously (–∞, –54.0dB to 18.0dB)
- Automatic track division: Automatically insert a track division at a preset condition
- Manual track division: Insert a track division by manual operation
- Time track division: Automatically insert a track division per preset interval (1 to 10 minutes, 1 minutes increments)
- Rec-mute function: Recording four seconds of silence on the disc
- Selectable maximum recording track numbers (automatically stop at preset number)
- Erase function: Erase selected track or disc (for CD-RW)
- Four playback modes (continuous, single, program, random)
- Repeat playback function (continuous, single, program, random, A-B)
- Fade-in/Fade-out playback function (OFF, 1 to 30 seconds, 1 seconds increments)
- Auto-cue function: Automatically pause by detection of a sound of start point in a track
- Auto-ready function: Automatically pause at head of next track after playback previous track
- Pitch control playback function: Pitch and speed can be varied (±16%, 0.1 to 1.0% increments, for CD-DA)
- Key control playback function: (b1 to b6, #1 to #6, half-note increments, for CD-DA)
- When using key control function with pitch control function, these function provides speed changing without changing pitch
- Timer playback function (external timer sold separately): Automatically begin playback when turned on
- Unfinalize function (for CD-RW): Erase TOC information of finalized CD-RW
- Time display switching (elapsed track/disc time, remaining track/disc time)
- CD-text editing supports
- PS/2 keyboard (sold separately) connection for remote control or entering a title
- SRC (sampling rate converter): Automatically convert the incoming frequency to 44.1kHz (for 32 to 48kHz)
- RCA analog unbalanced inputs/outputs
- COAXIAL digital input/output (IEC60958-3:S/PDIF)
- OPTICAL digital input/output (IEC60958-3:S/PDIF)
- Headphone output (20mW/ch)
- 3-polar AC sockets with the detachable AC cable
- 2U EIA rackmountable
- RoHS certified
Dedicated Features for CD-RW901MKII
- Sync trim function (±125 frame, ±1.67 seconds)
- Automatic track division with trim function (±125 frame, ±1.67 seconds)
- Selectable COPY ID（free/1 generation/prohibit/SCMS）
- Call function: Return to a point at which playback last started from ready mode
- EOM (end of message) function: EOM indicator will light-up before the end of track or disc (1 to 99 seconds)
- ISRC/RID code display function
- Time skip function: While in playback or ready, moves the playback point to forwards or backwards (1 seconds increments)
- Index search function: Search indexes within a track that were assigned during recording
- Overlap recording function: Using two-units CD-RW901MKII to make continuous recording
- Fader start/stop control via parallel control connector
- D-sub 9pin RS-232C serial control connector
- D-sub 15pin parallel control connector
- XLR analog balanced inputs/outputs
- XLR digital input/output (IEC60958-4:AES/EBU)
- Wired remote controller included
Differences from CD-RW900SL/CD-RW901SL
- New industrial design
- Tray loading type CD drive
CD-RW900MKII and CD-RW901MKII - New Upgraded Version 1.08 of Firmware Released
Learn MoreInformation
| Latest version info | |
| System firmware | V1.08 |
| Drive firmware | T.2P、T.4J、T.6C |
- If the SRC function was on and recoding of an input signal that was not 44.1kHz was started, "D-IN UNLOCK!" would appear and it would pause. This has been fixed.
- Operation stability has been improved.
