tascam logo

Support

[Updated] Information about Windows 10 November Update

02-02-2022

The verification results of our TASCAM products with Microsoft's "Windows 10 November" are as shown in the table below.

Note
The results may differ depending on each computer's configuration.

Last update:February 2, 2022

USB Audio Interface
Result Product Firmware Settings Panel / Driver Note
OK MiNiSTUDIO CREATOR V2.30 V2.33  
OK MiNiSTUDIO PERSONAL V2.30 V2.33  
OK iXR V1.02 V4.00  
OK US-1x2 V1.00 V4.00  
OK US-2x2 V1.01 V4.00  
OK US-4x4 V1.01 V4.00  
OK US-16x08 V2.00 V4.00  
OK Celesonic US-20x20 V2.00 V4.00  
OK TASCAM TRACKPACK iXR V1.02 V4.00  
OK TASCAM TRACKPACK 2x2 V1.01 V4.00  
OK TASCAM TRACKPACK 4x4 V1.01 V4.00  
OK UH-7000 V1.08 V1.02  
OK US-366 V1.03 V1.04  
OK US-1200 V1.00 V1.03rc1  
OK SERIES 102i V1.02 V1.00  
OK SERIES 208i V1.02 V1.00  
OK US-1x2HR V1.00 V1.00  
OK US-2x2HR V1.00 V1.00  
OK US-4x4HR V1.00 V1.00  

 

Handheld and Field Recorders
Result Product Firmware Software / Driver Note
OK DR-05X V1.14 V1.00  
OK DR-07X V1.14 V1.00  
OK DR-40X V1.06 V1.00  
OK Portacapture X8 V1.00 V1.00  

 

Mixer
Result Product Firmware Settings Panel / Driver Note
OK Model 24 V1.61 V1.20  
OK Model 16 V1.32 V1.20  
OK Model 12 V1.30 V1.20  
OK Mixcast 4 V1.10 V1.00  

 

Contractor
Result Product Firmware Software / Driver Note
OK MX-8A V1.12 V1.00  
OK 202MKVII - -  

 

Software
Result Product Version Note
OK New TASCAM Hi-Res Editor V1.03  
OK New TASCAM DCP CONNECT V1.1.1  
OK New TASCAM MX CONNECT V1.2.0  
OK New TASCAM EZ CONNECT V1.2.0  
OK New TASCAM SS250 CONTROL V2.0.0  
OK New TASCAM DR FILE TRANSFER V1.00  
OK New Poly/Mono Converter V1.00  
OK New TASCAM Podcast Editor V1.0.3