ML-32D
32-channel Analog/Dante Converter
A powerful and flexible solution
The TASCAM ML-32D is a professional Dante-focused converter made specifically to insert or extract analog audio into or out of a Dante (Digital Audio Network Through Ethernet) network using external breakout devices that utilize Sub-D format connectors.
- Power consumption : 22W
- Dimensions : 483(W)×45(H)×303.8(D)mm
- Weight : 3.5kg
- Dante focused interface for connection of external audio into or out of a Dante audio network
- 32 channel analog line input and 32 analog line outputs (48k/96kHz) using eight D-Sub connectors
- Dante primary and secondary connectors support redundancy
- Up to 96kHz/24-bit quality
- Equipped with a signal/overload indicator that enables level monitoring of analog input/output signals
- 1U rack mount size
- ML-32D × 1
- Power cord × 1
- Rackmount screw kit × 1
- Owner's Manual (including warranty) × 1
The ML-32D has four D-Sub inputs and four D-Sub outputs, which can easily be connected to any of the many devices that utilize D-Sub connectors such as microphone preamplifiers, large and small format console mixers, audio interfaces, amplifiers, and euro block connector devices. This simple, yet elegant, solution enables audio to be quickly and easily inserted into – or extracted from – the Dante audio stream.
The ML-32D makes it possible to transmit 32-channel analog line input/output signals
Primary and Secondary network connections redundancy and security
Primary and secondary connectors enable building a redundant system with a duplex network. Should the primary network route fails the ML-32D automatically switches to the secondary network route. This highly secure system prevents interruption and introduces no noise during the switch.
Integrated Signal/Overload indicator
The front panel is equipped with a signal/overload indicator that enables monitoring of analog input/output signals. The signal indicator turns on when a signal level becomes lower than -60dBFs.
Breakout boxes that enable flexible choice of connectors according to purposes
ML-32D is equipped with D-sub 25-pin connectors as analog line input/output connectors, and combining with optional breakout boxes enables conversion to Euro Block and XLR.
Additional Features
About Dante
Dante is a transmission protocol developed by Audinate. It enables multi-channel transmission (512ch IN/512ch OUT) and word-clock sync with high accuracy via network with gigabit Ethernet standard.
For further information about Dante, please visit Audinate's website:
https://www.audinate.com/
Flexible routing to connected Dante-compatible devices
The ML-32D uses Dante Controller to configure the main unit and to connect to other Dante-compatible devices. Dante Controller enables flexible routing configuration to other Dante-compatible devices.
About Dante ControllerDante Controller is a free software application released by Audinate. Download the latest version from Audinate website.
Audinate download page :
https://www.audinate.com/products/software/dante-controller
Possible to interconnect with AES67 and Ravenna systems
Dante supports AES67, which enables audio connection with systems using AES67 and AES67-compatible protocols including Ravenna.
5 selectable reference levels which can accommodate to a variety of scenes
The TASCAM ML-32D features selectable reference level setting from 5 maximum level options: +24dBu, +22dBu, +20dBu, and +18dBu (the standard level is +4dBu) and +15dBu (the standard level is +6dBu), which can accommodate to a variety of purposes including professional use in broadcasting studios, public address systems and recording environments.
Example of conversion using 2 Euro Block breakout boxes
Example of XLR connector conversion using 2 XLR IN breakout boxes and 2 XLR OUT breakout boxes
Features at a Glance
- Dante focused interface for connection of external audio into or out of a Dante audio network
- 32 channel analog line input and 32 analog line outputs (48k/96kHz) using eight D-Sub connectors
- Dante primary and secondary connectors support redundancy
- Up to 96kHz/24-bit quality
- Equipped with a signal/overload indicator that enables level monitoring of analog input/output signals
- Reference level dip switches for selectable DBu level metering
- Firmware updatable via Dante port
- 1U rack mount size
- Optional BO-32DE (D-sub/Euro Block breakout box) supports Euro Block connectors
- Using an optional BO-16DX/IN and BO-16DX/OUT (D-sub/XLR breakout box) supports XLR connectors
The Lume Melbourne Van Gogh Experience: Introducing Dante models in immersive digital art gallery
Learn MoreDante-compatible ML-32D contributes to the construction of a new compact office studio
Learn MoreYou might also like
Spec description
ML-32D | ML-16D | |
Formats | ||
Sampling frequency | 44.1k/48k/88.2k/96k Hz | |
Quantization bit rate | 16bit/24bit | |
ANALOG INPUTS/OUTPUTS | ||
Line inputs | ||
Connector | D-sub 25pin female | |
Locking screws | No.4-40 UNC (inch type) | |
Nominal input levels | +4dBu, +6dBu (only when maximum input level is +15 dBu) |
|
Maximum input levels | +24dBu, +22dBu, +20dBu, +18dBu, +15dBu (set by REF. LEVEL switches) |
|
Input impedance | 10kΩ or higher | |
Line outputs | ||
Connector | D-sub 25pin female | |
Connector | No.4-40 UNC (inch type) | |
Output impedance | 200Ω or lower | |
Applicable load impedance | 2kΩ or higher | |
Nominal output levels | +4dBu, +6dBu (only when maximum outtput level is +15 dBu) |
|
Maximum output levels | +24dBu, +22dBu, +20dBu, +18dBu, +15dBu (set by REF. LEVEL switches) |
|
PRIMARY/SECONDARY | ||
Connector | RJ-45×2 | |
Transmission protocol | Dante | |
Gigabit Ethernet standard | 1000BASE-T(IEEE 802.3ab) | |
Cables | Category 5e or faster STP cables | |
Power | AC100V, 50/60Hz | |
Power consumption | 22W | 14W |
Dimensions | 483(W)×45(H)×303.8(D)mm | |
Weight | 3.5kg | 3.3kg |
Operating temperature range | 0~40˚C | |
Standard accessories | Power cord, Rackmount screw kit, Owner’s Manual (including warranty) |
Audio performance
ANALOG IN → Dante OUT
Frequency response | |
20Hz/20kHz | +0.1dB/-0.5dB (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA) |
20Hz/40kHz | +0.1dB/-0.5dB (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA) |
Distortion (THD+N) | 0.001% or lower (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) |
S/N ratio | 113dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA) |
Crosstalk | 115dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) |
Dante OUT → ANALOG IN
Frequency response | |
20Hz/20kHz | +0.1dB/-0.5dB (-16 dBFS input, 44.1/48 kHz sampling frequency, JEITA) |
20Hz/40kHz | +0.1dB/-1.0dB (-16 dBFS input, 88.2/96 kHz sampling frequency, JEITA) |
Distortion (THD+N) | 0.001% or lower (-1 dBFS input, 1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) |
S/N ratio | 110dB or higher (44.1/48/88.2/96 kHz sampling frequency, JEITA) |
Crosstalk | 115dB or higher (1 kHz, 44.1/48/88.2/96 kHz sampling frequency, JEITA) |
Information
Latest version info | |
Dante firmware | V1.2.0 |
- SMPTE2110-30 has been supported.
Dante Domain Manager (DDM) v1.1 or later is required to use SMPTE 2110-30 audio.
Spec
CAD outline (PDF) | 12-11-2017 | 171.7 KB |
---|---|---|
Specifications | 12-11-2017 | 350.9 KB |
CAD outline (DXF/PDF) | 12-11-2017 | 450.6 KB |
Manuals
Owner's Manual | 01-22-2018 | 2.5 MB |
---|
Documents
Release Note (English) | 02-10-2020 | 82.1 KB |
---|---|---|
Dante Module Firmware Update Procedures (English) | 02-10-2020 | 1.2 MB |
Firmware
Dante firmware V1.2.0 | 02-10-2020 | 5.8 MB |
---|
Catalogs
TASCAM System Design Guide for Audio Installation, 2024 | 01-18-2024 | 6.6 MB |
---|