LM-8ST
8 Stereo Channel Line Mixer
Single rackmount mixer with 8ST input With single-microphone input, you can take this device along to live stage shows and events
- Power consumption: 15W
- Dimensions (W×H×D): 482 × 44 × 280 mm
- 8 stereo channel / 4-buss line mixer
- 8 stereo 1/4" TRS balanced inputs with –10/+4dB switch
- Mic input with trim control on front panel
- 2-segment LED meter per channel
- 1/4" and 1/8" stereo headphone outputs
- XLR balanced ouptuts for ST1 and ST2/AUX
- Stereo balanced buss output/input for cascade
- LM-8ST x 1
- Power cord x 1
- Rackmount screw kit x 1
- A warranty card x 1
- Owner's manual x 1
The LM-8ST is a line mixer that mixes eight stereo line inputs. In addition to the TRS balance line inputs available for each channel, an XLR balanced mic input is possible with channel-1. The LM-8ST supports a simple PA system that requires a microphone.
Two different busses that can output different mixes
Since there two independent output busses, the users can output using different mixes. Each output buss is equipped with an XLR balanced output and RCA unbalanced output. Furthermore, the ST 2/AUX buss can be used as an AUX buss; as such, this allows the user to use the ST 2/AUX buss for sending effects (input from either buss can be used for effect return). This device can be used for various applications, including stereo source selection at stores, restaurants, banquet facilities, and acoustic facilities, as well as using a microphone to make announcements and sound mixing, and even as an on-stage keyboard mixer and sub-mixer.
Features at a Glance
- 8 stereo channel / 4-buss line mixer
- 8 stereo 1/4" TRS balanced inputs with –10/+4dB switch
- 1U rack mountable
- Mic input with trim control on front panel
- 2-segment LED meter per channel
- ST1 and ST2/AUX level control per channel
- ST1 and ST2/AUX master level controls
- Each channel switchable to ST2 (pre fader) or AUX (post) output
- 1/4" and 1/8" stereo headphone outputs
- XLR balanced ouptuts for ST1 and ST2/AUX
- Stereo balanced buss output/input for cascade
- Ground lift switch and terminal
