CC-222MKIV
CD Recorder/Cassette Deck
The CC-22MKIV is a professional CD/cassette recorder that succeeds the TASCAM CC-222SLMKII.
The original CD/cassette recorder that played a key role in various professional acoustic sites has been revamped by turning the single CD drive into a tray loading type.
This model has been discontinued.
Featuring CD and cassettes that allow separate operations and inputs/outputs
Not only can the CC-22MKIV perform mutual dubbing between CD and cassette, it can also perform independent operability for the individual inputs and outputs of CDs and cassettes.
Furthermore, phono input is also supported, meaning that records can be recorded onto cassettes and CD-R/RW.
In addition to analog line input and output and phono input, COAXIAL and OPTICAL digital inputs and outputs are also supported, making the CC-22MKIV a combination recorder that can flexibly perform recording and playback for all kinds of acoustic setups.
CD drive developed in-house by TASCAM that enables gapless continuous recording via its designated firmware
The shining feature of the CD recorder unit is its AK4528VM audio codec, produced by Asahi Kasei Electronics, and is used for AD/DA conversion which dictates the sound quality.
For the drive, a driver developed in-house by TASCAM both high in durability and reliability is installed.
The driver has finely-tuned response performance due to being internally produced, and can also perform gapless continuous recording when updating tracks, thanks to its specially-designed firmware, a feat that is impossible with standard PC drivers.
The CC-222MKIV is a professional combination CD/cassette recorder that will provide long-lasting use in professional acoustic settings.
The CD and Cassette Recorder Sections Can Be Operated independently - Including Indiviual Inputs and Outputs.
Dub Between CD and Cassette, or Simultaneously Record To Both
A Built-In Phono Input Enables Recording Vinyl Records Directly to CD or Cassette
* This unit supports analog turntables that use MM(moving magnet) cartridges.
Connect Analog and Digital Devices To Record Them to CD or Cassette
* Connect analog turntables to the RIAA PHONO INPUT jacks.
24-bit AKM AK4528VM AD/DA conversion
A Selection of Track Division Functions
Automatic Track Division
A track marker can be created based on the input level, adding a new track when the input falls below a specified level (from -24 to -72dB).
* When recording analog records, it is recommended that the auto track function is switched OFF. Noises caused by scratches and dust on records might result in the audio track function not working properly.
Time Track Division
Time-based track creation can be set every 1-10 minutes. This method is preferred in some applications - such as conference recording, when there is no gap between segments (like when recording music).
Manual Track Division
A new track can be written manually by pressing the RECORD key while the unit is in record mode.
All new TEAC-designed tray-loading transport with gapless continuous recording
Unlike drives designed for general PC use, TEAC’s transport won’t leave a dropout between songs – making it ideal for live recording..
Shockproof Memory to Prevent Skipping due to Vibration
Features at a Glance
- Supported media: CD-R, CD-R-DA, CD-RW, CD-RW-DA
- High speed CD-RW Supports
- CD drive supports playback of CD-DA and Data-CD
- High reliability in-house manufactured CD drive
- OPC (optimum power control) function: Adjusting the laser power for each disc type
- Adopts AK4528VM audio codec made by Asahi Kasei Microdevices which has 24-bits processing
- RCA analog unbalanced inputs/outputs
- COAXIAL digital input/output (IEC60958-3:S/PDIF)
- OPTICAL digital input/output (IEC60958-3:S/PDIF)
- SRC (sampling rate converter): Automatically convert the incoming frequency to 44.1kHz (for 32 to 48kHz)
- Repeat playback function (continuous, single, program, random, A-B)
- Pitch control playback function: Pitch and speed can be varied (+/-12.5%, 0.1 to 1.0% increments, for CD-DA)
- Key control playback function: (b1 to b6, #1 to #6, half-note increments, for CD-DA)
- Intro check function that plays the first 10 seconds of each track
- Auto space function that inserts about four seconds of silence between tracks during playback
- Time display switching (elapsed track/disc time, remaining track/disc time)
- Timer playback function (external timer sold separately): Automatically begin playback when turned on
- Sync recording function that automatically starts recording when sound begins
- -24dB to -72dB、6dB step(Digital input) -24dB to -54dB、6dB step(Analog input)
- Automatic track division: Automatically insert a track division at a preset condition
- Time track division: Automatically insert a track division per preset interval
- (1 to 10 minutes, 1 minutes increments)
- New consecutively-numbered tracks can be created during recording by pressing the RECORD button
- Rec-mute function: Recording four seconds of silence on the disc
- Selectable maximum recording track numbers (automatically stop at preset number)
- Digital volume for critical recording level adjustment (-∞、-60dB to 18dB)
- Fade-in/Fade-out recording function (1 to 30 seconds, 1 seconds increments)
- Selectable COPY ID(free/1 generation/prohibit/SCMS)
- Erase function: Erase selected track or disc (for CD-RW)
- Unfinalize function (for CD-RW): Erase TOC information of finalized CD-RW
Cassette recorder section
- Auto-reverse recording and playback mechanism
- Pitch control playback function: Pitch and speed can be varied (+/-10%)
- RTZ (Return to Zero) function that locates to the 0000 tape counter
- Rec-mute function: Recording four seconds of silence on the tape
General
- Independent input and output are possible for the CD and cassette sections
- Dubbing is possible both ways between the CD and cassette sections
- Built-in amp with MM-type (moving magnet) phono equalization allows direct connection of analog record players
- Built-in PHONO input jacks allow vinyl records to be dubbed to cassettes and CDs
- Independent operation (including simultaneous recording) of the CD recorder and cassettes section possible
- Continuous playback is possible both ways between the CD and cassette sections
- The playback signal from the CD or cassette (cassette receives priority) can be output from LINE OUTPUTS 2
- Headphone output (10mW/ch)
- Wireless 10-key remote controller with 10-key included
- 3-polar AC socket with detachable AC cable
- 3U EIA rackmountable
- RoHS certified
Differences from CC-222SLII
- Tray loading type CD drive
- Dolby B is not supported
- Industrial design
Spec description
CD recorder section | |
Supported disc types | CD-R, CD-R-DA, CD-RW, CD-RW-DA(High Speed CD-RW is supported) |
Playback disc formats | CD-DA, CD-ROM ISO9660 LEVEL 1/2 Joilet format and multisession discs |
Playback file formats | |
CD-DA | 44.1kHz, 16bit, stereo |
MP3 | 44.1kHz, 64 to 320kbps, VBR |
Recording file formats | |
CD-DA | 44.1kHz, 16bit, stereo |
Cassette recorder section | |
Track system | 4-track 2-channel, stereo |
Heads | Record/playback×1(rotary reverse), erase×1 |
Type of tapes | C-60 to C-90 *Type I(normal), Type II(high-posirion)-recording and playback; Type IV(metal)-playback only |
Tape speed | 4.76cm/sec |
Motor | DC servo motor×1 |
Pitch control | +/-10% |
Fast winding time | Approximately 160 sec (C-60 tape) |
PHONO amplifier | |
Cartridge | Type MM |
Input impedance | 50kΩ |
Input signal level | 5.6mV |
S/N ratio | 60dB(6.3Ω) |
ANALOG IN | Unbalanced |
LINE INPUTS 1 (CD) | |
Connector | RCA pin jack |
Input impedance | 22kΩ |
Reference input level | -10dBV |
Minimum input level | +6dBV |
LINE INPUTS 2 (TAPE) | |
Connector | RCA pin jack |
Input impedance | 1kΩ |
Reference input level | -11dBV(0.28V) |
ANALOG OUT | Unbalanced |
LINE OUTPUTS 1 (CD) | |
Connector | RCA pin jack |
Output impedance | 50kΩ |
Reference output level | -10dBV |
Maximum output level | +6dBV |
LINE OUTPUTS 2 (TAPE/AUTO) | |
Connector | RCA pin jack |
Output impedance | 1kΩ |
Reference output level | -6.7dBV(0.46V) |
DIGITAL IN | |
COAXIAL | |
Connector | RCA pin jack |
Format | IEC60958-3(S/PDIF) |
OPTICAL | |
Connector | TOS LINK |
Format | IEC60958-3(S/PDIF) |
DIGITAL OUT | |
COAXIAL | |
Connector | RCA pin jack |
Format | IEC60958-3(S/PDIF) |
OPTICAL | |
Connector | TOS LINK |
Format | IEC60958-3(S/PDIF) |
PHONES | |
Connector | 6.3mm(1/4") stereo phone jack |
Output power | 10mW+10mW or more(32Ω loaded) |
Power | U.S.A./Canada: 120VAC, 60Hz U.K./Europe: 230VAC, 50Hz Australia: 240VAC, 50Hz |
Power consumption | 35W |
Dimensions | 482.6(W)×138(H)×295(D)mm 19.0(W)×5.4(H)×11.6(D)in |
Weight | 7.2kg/15.9lb |
Standard accessories | Power cord, Wireless remote controller(TASCAM RC-222MKIV), AA battery x2, Rack mounting screw, Owner's manual((including warranty card) |
Audio performance | |
Frequency response | |
CD | playback : 20Hz to 20kHz, +/-0.8dB recording : 20Hz to 20kHz, +/-1.0dB |
Cassette | normal : 30Hz to 13kHz, +/-4dB high position: 30Hz to 15kHz, +/-4dB |
S/N ratio | |
CD | playback : 92dB recording : 88dB |
Cassette | 53dB(Maximum input level) |
Dynamic range | |
CD | playback : 92dB recording : 88dB |
Distortion | |
CD | playback : 0.006% recording : 0.01% |
Channel separation | |
CD | playback : 80dB(1kHz) recording : 75dB(1kHz) |
Wow and flutter | |
CD | unmeasurable(<0.001%) |
Cassette | 0.25%(W.RMS) |
Spec
CAD outline DXF | 04-16-2014 | 1.5 MB |
---|
Manuals
Manuals | 02-18-2015 | 2.2 MB |
---|
Documents
Specifications | 06-04-2014 | 199.8 KB |
---|