------------------------------------------------------------------------------------------------------------
Latest information (2025.1.8)
------------------------------------------------------------------------------------------------------------
This latest versions of the unit Dante modules are as follows.
 - Brooklyn II
   Product Version           : V1.0.3  (Previously V1.0.2 Updated at this time)  (date of latest update: 8 January 2025)     
   Software Version          : V1.0.3.2
   Firmware Version          : V1.0.3.2
    Dante Firmware Version    : V4.2.8.2

 - Brooklyn 3
    Product Version             : V1.0.3  (Previously V1.0.2 Updated at this time)  (date of latest update: 8 January 2025)
    Software Version            : V1.0.3.2
    Firmware Version            : V1.0.3.2
    Dante Firmware Version      : V4.2.9.4

*************************************************************************************************
The Dante Module update file differs between Dante Model Brooklyn II and Brooklyn 3.
To check the current model, follow the steps below and proceed to update:
(Please refer to the "TASCAM Dante module update manual" for the update instructions.)

[To verify the Dante model]
 - Checking with Dante Controller
    (1) After launching Dante Controller, double-click the name of the device being used on the Routing tab.
    (2) Click the Status tab. The model name is written to the right of “Model” under Dante Information.
 - On a Sonicview console with firmware V1.5.3 and later:
    Main MENU > Rear Panel Setup > Dante Setup > Sante Settings Tab > Brooklyn II or 3 can be seen in the MODULE's Dante Model
 - On a Sonicview console with firmware before V1.5.3;
   you can verify the Dante model with the serial number printed on the main unit:
    - Serial number [223xxxx, 226xxxx, 229xxxx, 2362xxx, 2372xxx, 2382xxx, 2392xxx] uses Brooklyn II
    - Serial number [232xxxx, 234xxxx, 235xxxx, 2363xxx, 2373xxx, 2383xxx, 2393xxx] uses Brooklyn 3
*************************************************************************************************

We request that you always use the latest software/firmware version for this unit.
For information about the latest software/firmware, check the TEAC Global Site (http://teac-global.com/)

-------------------------------------------------------------------------------------------------------------
Information about related equipment, software and other versions
-------------------------------------------------------------------------------------------------------------
The following information about versions is current as of January 8, 2025.
Please check individual product pages for the latest information.

- TASCAM Sonicview 16/24
  - Firmware      : V2.0.0  (date of latest update: 8 January 2025)

  - Dante module firmware
       < Brooklyn II >  (date of latest update: 8 January 2025)
           Product Version             : V1.0.3   
           Software Version            : V1.0.3.2
           Firmware Version            : V1.0.3.2
           Dante Firmware Version      : V4.2.8.2

        < Brooklyn 3 >    (date of latest update: 8 January 2025)
           Product Version             : V1.0.3
           Software Version            : V1.0.3.2
           Firmware Version            : V1.0.3.2
           Dante Firmware Version      : V4.2.9.4

- "TASCAM Sonicview Control" software for TASCAM Sonicview 16/24
   Version         : V2.0.0  (date of latest update: 8 January 2025)

- "TASCAM Sonicview USB for Windows" USB driver for TASCAM Sonicview 16/24
    Version         : V1.0.1   (date of latest update: no update)

- IF-MTR32 32-channel multitrack recording card for TASCAM Sonicview 16/24
  Firmware        : V1.12   (date of latest update: 13 December 2023)

- SB-16D
    - Firmware      : V1.20  (date of latest update: 4 April 2024)

  - Dante module firmware
       <TASCAM SB-16D units with serial numbers No.223xxxx, 226xxxx, 228xxxx(Brooklyn II)>   (date of latest update: no update)
          Product Version             : V1.0.0
          Software Version            : V1.0.0.3
          Firmware Version            : V1.0.0.3
          Dante Firmware Version      : V4.2.3.13

        <TASCAM SB-16D units with serial numbers Serial No.232xxxx and later(Brooklyn 3)>     (date of latest update: 18 October 2023)
          Product Version             : V1.0.1
          Software Version            : V1.0.1.1
          Firmware Version            : V1.0.1.1
          Dante Firmware Version      : V4.2.7.7

- "TASCAM IO CONTROL" software for SB-16D
    Version         : V1.1.1  (date of latest update: 4 April 2024)

<URLs>
 TASCAM Sonicview 16 related :<https://tascam.jp/int/product/sonicview_16/download>
 TASCAM Sonicview 24 related :<https://tascam.jp/int/product/sonicview_24/download>
 TASCAM IF-MTR32 related     :<https://tascam.jp/int/product/if-mtr32/download>
 TASCAM SB-16D related       :<https://tascam.jp/int/product/sb-16d/download>
=============================================================================================================
-------------------------------------------------------------------------------------------------------------
<2025.1.8>
Brooklyn 2 
  Product Version             : V1.0.3   
  Software Version            : V1.0.3.2
  Firmware Version            : V1.0.3.2
  Dante Firmware Version      : V4.2.8.2

Brooklyn 3 
  Product Version             : V1.0.3
  Software Version            : V1.0.3.2
  Firmware Version            : V1.0.3.2
  Dante Firmware Version      : V4.2.9.4
-------------------------------------------------------------------------------------------------------------
< Maintenance items >
- Brooklyn II/Brooklyn 3:
  When there were multiple units of Sonicview and SB-16D on the same network, 
   some SB-16D units could not be recognized on the I/O Device page of Sonicview. This has been fixed.
- Brooklyn II:
  On the Dante Settings page of Sonicview, the secondary IP address would be displayed as "0.2.0.0"
   and the subnet mask as "0.0.0.0". This has been fixed.
- Brooklyn 3:
  When the LAN cable was not connected, the LINK Status on the Dante Settings page of Sonicview would be displayed as "10M".
   This has been fixed.


-------------------------------------------------------------------------------------------------------------
<2024.4.4>
Brooklyn 2 
  Product Version             : V1.0.2   
  Software Version            : V1.0.2.1
  Firmware Version            : V1.0.2.1
  Dante Firmware Version      : V4.2.3.13

Brooklyn 3 
  Product Version             : V1.0.2
  Software Version            : V1.0.2.1
  Firmware Version            : V1.0.2.1
  Dante Firmware Version      : V4.2.7.7
-------------------------------------------------------------------------------------------------------------
< Maintenance items >
- When Sonicview was enrolled in a domain using Dante Domain Manager,
  changes to settings from Sonicview's Dante Settings screen were not reflected. This has been fixed.


-------------------------------------------------------------------------------------------------------------
<2023.10.18>
Brooklyn 3 
 Product Version         : V1.0.1
 Software Version        : V1.0.1.1
 Firmware Version        : V1.0.1.1
 Dante Firmware Version  : V4.2.7.7
-------------------------------------------------------------------------------------------------------------
< Maintenance items >
- The firmware for the Dante module (Brooklyn 3) has been updated.