------------------------------------------------------------------------------------------------------------
Latest information (2024.4.4)
------------------------------------------------------------------------------------------------------------
This latest versions of the unit Dante modules are as follows.
- Brooklyn II
Product Version : V1.0.2 (Previously V1.0.1 Updated at this time) （date of latest update: 4 April 2024）
Software Version : V1.0.2.1
Firmware Version : V1.0.2.1
Dante Firmware Version : V4.2.3.13
- Brooklyn 3
Product Version : V1.0.2 (Previously V1.0.1 Updated at this time) （date of latest update: 4 April 2024）
Software Version : V1.0.2.1
Firmware Version : V1.0.2.1
Dante Firmware Version : V4.2.7.7
We request that you always use the latest software/firmware version for this unit.
For information about the latest software/firmware, check the TEAC Global Site (http://teac-global.com/)
-------------------------------------------------------------------------------------------------------------
Information about related equipment, software and other versions
-------------------------------------------------------------------------------------------------------------
The following information about versions is current as of June 19, 2024.
Please check individual product pages for the latest information.
- TASCAM Sonicview 16/24
- Firmware : V1.6.1 （date of latest update: 19 June 2024）
- Dante module firmware
< Brooklyn II > （date of latest update: 4 April 2024）
Product Version : V1.0.2
Software Version : V1.0.2.1
Firmware Version : V1.0.2.1
Dante Firmware Version : V4.2.3.13
< Brooklyn 3 > （date of latest update: 4 April 2024）
Product Version : V1.0.2
Software Version : V1.0.2.1
Firmware Version : V1.0.2.1
Dante Firmware Version : V4.2.7.7
*************************************************************************************************
The Dante Module update file differs between Dante Model Brooklyn II and Brooklyn 3.
To check the current model, follow the steps below and proceed to update:
(Please refer to the "TASCAM Dante module update manual" for the update instructions.)
[To verify the Dante model]
- Checking with Dante Controller
(1) After launching Dante Controller, double-click the name of the device being used on the Routing tab.
(2) Click the Status tab. The model name is written to the right of “Model” under Dante Information.
- On a Sonicview console with firmware V1.5.3 and later:
Main MENU > Rear Panel Setup > Dante Setup > Sante Settings Tab > Brooklyn II or 3 can be seen in the MODULE's Dante Model
- On a Sonicview console with firmware before V1.5.3;
you can verify the Dante model with the serial number printed on the main unit:
- Serial number [223xxxx, 226xxxx, 229xxxx, 2362xxx, 2372xxx, 2382xxx, 2392xxx] uses Brooklyn II
- Serial number [232xxxx, 234xxxx, 235xxxx, 2363xxx, 2373xxx, 2383xxx, 2393xxx] uses Brooklyn 3
*************************************************************************************************
- "TASCAM Sonicview Control" software for TASCAM Sonicview 16/24
Version : V1.6.0 （date of latest update: 4 April 2024）
- "TASCAM Sonicview USB for Windows" USB driver for TASCAM Sonicview 16/24
Version : V1.0.1 (date of latest update: no update)
- IF-MTR32 32-channel multitrack recording card for TASCAM Sonicview 16/24
Firmware : V1.12 （date of latest update: 13 December 2023）
- SB-16D
- Firmware : V1.20 （date of latest update: 4 April 2024）
- Dante module firmware
<TASCAM SB-16D units with serial numbers No.223xxxx, 226xxxx, 228xxxx（Brooklyn II）> (date of latest update: no update)
Product Version : V1.0.0
Software Version : V1.0.0.3
Firmware Version : V1.0.0.3
Dante Firmware Version : V4.2.3.13
<TASCAM SB-16D units with serial numbers Serial No.232xxxx and later（Brooklyn 3）> （date of latest update: 18 October 2023）
Product Version : V1.0.1
Software Version : V1.0.1.1
Firmware Version : V1.0.1.1
Dante Firmware Version : V4.2.7.7
- "TASCAM IO CONTROL" software for SB-16D
Version : V1.1.1 （date of latest update: 4 April 2024）
<URLs>
TASCAM Sonicview 16 related :<https://tascam.jp/int/product/sonicview_16/download>
TASCAM Sonicview 24 related :<https://tascam.jp/int/product/sonicview_24/download>
TASCAM IF-MTR32 related ：<https://tascam.jp/int/product/if-mtr32/download>
TASCAM SB-16D related :<https://tascam.jp/int/product/sb-16d/download>
=============================================================================================================
-------------------------------------------------------------------------------------------------------------
<2024.4.4>
Brooklyn 2
Product Version : V1.0.2
Software Version : V1.0.2.1
Firmware Version : V1.0.2.1
Dante Firmware Version : V4.2.3.13
Brooklyn 3
Product Version : V1.0.2
Software Version : V1.0.2.1
Firmware Version : V1.0.2.1
Dante Firmware Version : V4.2.7.7
-------------------------------------------------------------------------------------------------------------
< Maintenance items >
- When Sonicview was enrolled in a domain using Dante Domain Manager,
changes to settings from Sonicview's Dante Settings screen were not reflected. This has been fixed.
-------------------------------------------------------------------------------------------------------------
<2023.10.18>
Brooklyn 3
Product Version : V1.0.1
Software Version : V1.0.1.1
Firmware Version : V1.0.1.1
Dante Firmware Version : V4.2.7.7
-------------------------------------------------------------------------------------------------------------
< Maintenance items >
- The firmware for the Dante module (Brooklyn 3) has been updated.