------------------------------------------------------------------------------------------------------------
Latest information (2024.4.4)
------------------------------------------------------------------------------------------------------------
This latest versions of the unit Dante modules are as follows.
 - Brooklyn II
 　 Product Version         　　: V1.0.2  (Previously V1.0.1 Updated at this time)  （date of latest update: 4 April 2024）     
 　 Software Version        　　: V1.0.2.1
 　 Firmware Version       　　 : V1.0.2.1
    Dante Firmware Version  　　: V4.2.3.13

 - Brooklyn 3
    Product Version             : V1.0.2  (Previously V1.0.1 Updated at this time)  （date of latest update: 4 April 2024）
    Software Version            : V1.0.2.1
    Firmware Version            : V1.0.2.1
    Dante Firmware Version      : V4.2.7.7

*************************************************************************************************************
Different Dante module update files are necessary because of differences in the Dante module models built into this product.
(This product uses one of two Dante module models: Brooklyn II or Brooklyn 3.)
The Dante module model in the unit being used can be determined as follows.

 - Checking with Dante Controller
 　(1) After launching Dante Controller, double-click the name of the device being used on the Routing tab.
 　(2) Click the Status tab. The model name is written to the right of “Model” under Dante Information.

 - On a Sonicview console with firmware V1.5.3 and later:
    Main MENU > Rear Panel Setup > Dante Setup > Sante Settings Tab > Brooklyn II or 3 can be seen in the MODULE's Dante Model

 - On a Sonicview console with firmware before V1.5.3;
   you can verify the Dante model with the serial number printed on the main unit:
    - Serial number [223xxxx, 226xxxx, 229xxxx, 2362xxx, 2372xxx, 2382xxx, 2392xxx] uses Brooklyn II
    - Serial number [232xxxx, 234xxxx, 235xxxx, 2363xxx, 2373xxx, 2383xxx, 2393xxx] uses Brooklyn 3
*************************************************************************************************************

We request that you always use the latest software/firmware version for this unit.
For information about the latest software/firmware, check the TEAC Global Site (http://teac-global.com/)

-------------------------------------------------------------------------------------------------------------
Information about related equipment, software and other versions
-------------------------------------------------------------------------------------------------------------
The following information about versions is current as of April 4, 2024.
Please check individual product pages for the latest information.

- TASCAM Sonicview 16/24
　　- Firmware      : V1.6.0  （date of latest update: 4 April 2024）

　　- Dante module firmware
      　< Brooklyn II >  （date of latest update: 4 April 2024）
           Product Version             : V1.0.2   
           Software Version            : V1.0.2.1
           Firmware Version            : V1.0.2.1
           Dante Firmware Version      : V4.2.3.13

        < Brooklyn 3 >    （date of latest update: 4 April 2024）
           Product Version             : V1.0.2
           Software Version            : V1.0.2.1
           Firmware Version            : V1.0.2.1
           Dante Firmware Version      : V4.2.7.7

- "TASCAM Sonicview Control" software for TASCAM Sonicview 16/24
  　Version         : V1.6.0  （date of latest update: 4 April 2024）

- "TASCAM Sonicview USB for Windows" USB driver for TASCAM Sonicview 16/24
    Version         : V1.0.1   (date of latest update: no update)

- IF-MTR32 32-channel multitrack recording card for TASCAM Sonicview 16/24
　　Firmware        : V1.12   （date of latest update: 13 December 2023）

- SB-16D
    - Firmware      : V1.20  （date of latest update: 4 April 2024）

　　- Dante module firmware
      　<TASCAM SB-16D units with serial numbers No.223xxxx, 226xxxx, 228xxxx（Brooklyn II）>   (date of latest update: no update)
          Product Version             : V1.0.0
          Software Version            : V1.0.0.3
          Firmware Version            : V1.0.0.3
          Dante Firmware Version      : V4.2.3.13

        <TASCAM SB-16D units with serial numbers Serial No.232xxxx and later（Brooklyn 3）>     （date of latest update: 18 October 2023）
          Product Version             : V1.0.1
          Software Version            : V1.0.1.1
          Firmware Version            : V1.0.1.1
          Dante Firmware Version      : V4.2.7.7

- "TASCAM IO CONTROL" software for SB-16D
    Version         : V1.1.1  （date of latest update: 4 April 2024）

<URLs>
 TASCAM Sonicview 16 related :<https://tascam.jp/int/product/sonicview_16/download>
 TASCAM Sonicview 24 related :<https://tascam.jp/int/product/sonicview_24/download>
 TASCAM IF-MTR32 related     ：<https://tascam.jp/int/product/if-mtr32/download>
 TASCAM SB-16D related       :<https://tascam.jp/int/product/sb-16d/download>
=============================================================================================================

-------------------------------------------------------------------------------------------------------------
<2024.4.4>
Brooklyn 2 
  Product Version             : V1.0.2   
  Software Version            : V1.0.2.1
  Firmware Version            : V1.0.2.1
  Dante Firmware Version      : V4.2.3.13

Brooklyn 3 
  Product Version             : V1.0.2
  Software Version            : V1.0.2.1
  Firmware Version            : V1.0.2.1
  Dante Firmware Version      : V4.2.7.7
-------------------------------------------------------------------------------------------------------------
< Maintenance items >
- When Sonicview was enrolled in a domain using Dante Domain Manager,
  changes to settings from Sonicview's Dante Settings screen were not reflected. This has been fixed.


-------------------------------------------------------------------------------------------------------------
<2023.10.18>
Brooklyn 3 
 Product Version         : V1.0.1
 Software Version        : V1.0.1.1
 Firmware Version        : V1.0.1.1
 Dante Firmware Version  : V4.2.7.7
-------------------------------------------------------------------------------------------------------------
< Maintenance items >
- The firmware for the Dante module (Brooklyn 3) has been updated.