-------------------------------------------------------------------------------------------------------------
Latest information (2025.4.1)
-------------------------------------------------------------------------------------------------------------
The most recent versions of the firmware for this unit are as follows.
Firmware: V1.21 (Previously V1.20 Updated at this time)
We request that you always use the latest software/firmware version for this unit.
For information about the latest software/firmware, check the TEAC Global Site (http://teac-global.com/)
-------------------------------------------------------------------------------------------------------------
Information about related equipment, software and other versions
-------------------------------------------------------------------------------------------------------------
The following information about versions is current as of April 1, 2025.
Please check individual product pages for the latest information.
- TASCAM Sonicview 16/24
- Firmware : V2.1.0 （date of latest update: 1 April 2025）
- Dante module firmware
< Brooklyn II > （date of latest update: 8 January 2025）
Product Version : V1.0.3
Software Version : V1.0.3.2
Firmware Version : V1.0.3.2
Dante Firmware Version : V4.2.8.2
< Brooklyn 3 > （date of latest update: 8 January 2025）
Product Version : V1.0.3
Software Version : V1.0.3.2
Firmware Version : V1.0.3.2
Dante Firmware Version : V4.2.9.4
- "TASCAM Sonicview Control" software for TASCAM Sonicview 16/24
- Version : V2.0.0 （date of latest update: 8 January 2025）
- "TASCAM Sonicview USB for Windows" USB driver for TASCAM Sonicview 16/24
- Version : V1.10 (date of latest update: 1 April 2025)
- IF-MTR32 32-channel multitrack recording card for TASCAM Sonicview 16/24
- Firmware : V1.12 （date of latest update: 13 December 2023）
- SB-16D
- Firmware : V1.21 （date of latest update: 1 April 2025）
- Dante module firmware
<TASCAM SB-16D units with serial numbers No.223xxxx, 226xxxx, 228xxxx（Brooklyn II）> (date of latest update: 1 April 2025)
Product Version : V1.0.1
Software Version : V1.0.1.1
Firmware Version : V1.0.1.1
Dante Firmware Version : V4.2.8.2
<TASCAM SB-16D units with serial numbers Serial No.232xxxx and later（Brooklyn 3）> （date of latest update: 1 April 2025）
Product Version : V1.0.2
Software Version : V1.0.2.1
Firmware Version : V1.0.2.1
Dante Firmware Version : V4.2.9.4
- "TASCAM IO CONTROL" software for SB-16D
- Version : V1.1.1 （date of latest update: 4 April 2024）
<URLs>
TASCAM Sonicview 16 related :<https://tascam.jp/int/product/sonicview_16/download>
TASCAM Sonicview 24 related :<https://tascam.jp/int/product/sonicview_24/download>
TASCAM IF-MTR32 related ：<https://tascam.jp/int/product/if-mtr32/download>
TASCAM SB-16D related :<https://tascam.jp/int/product/sb-16d/download>
=============================================================================================================
--------------------------------------------------------------------------------------------------------------
FW V1.21 (2025.4.1)
--------------------------------------------------------------------------------------------------------------
< Maintenance items >
- When the unit's GPIO setting was “Local”, the input audio would sometimes remain muted
even after the mute setting for the GPIO-IN analog input had been canceled from the Sonicview. This has been fixed.
- The unit could not be recognized by the Sonicview on rare occasions. This has been fixed.
- Increasing the number of devices on the network would make it harder for the unit to be recognized by the Sonicview. This has been fixed.
- When the mute setting for the unit was canceled from the Sonicview,
the mute settings for other inputs and outputs could also be simultaneously canceled. This has been fixed.
- Operation stability has been improved.
--------------------------------------------------------------------------------------------------------------
FW V1.20 (2024.4.4)
--------------------------------------------------------------------------------------------------------------
< Maintenance items >
- When an SB-16D was mounted to the Sonicview, regardless of the settings, all SB-16D GPIO-OUTSs would turn to OPEN. This has been fixed.
- Dante settings were not initialized when Factory Reset was performed. This has been fixed.
- Operation stability has been improved.
--------------------------------------------------------------------------------------------------------------
FW V1.10 (2023.10.18)
--------------------------------------------------------------------------------------------------------------
< New functions >
- Connection from multiple IO CONTROL apps is now possible, with a maximum of 10 simultaneous log-ins, including TASCAM Sonicview 16/24.
- Pulse width and polarity settings for GPIO OUT are now supported. This has been applied in accordance with the additional functions in Sonicview FW (V1.5.0).
< Maintenance items >
- Operation stability has been improved.
--------------------------------------------------------------------------------------------------------------
FW V1.02 (2023.4.19)
--------------------------------------------------------------------------------------------------------------
< Maintenance items >
- If the GPIO-OUT port operation mode was set to “Extension” for multiple ports of this unit, a delay occurred in the output timing of each port.
This has been changed so that output occurs with the same timing.
Note: To enable these changes, update the firmware of the Sonicview unit to version 1.3.0. These changes will not take effect with version 1.2.0 or older.
- When recalling preset data from TASCAM IO CONTROL, the mute status before recalling would be retained. This has been fixed.