------------------------------------------------------------------------------------------------------------
Latest information (2025.4.1)
------------------------------------------------------------------------------------------------------------
This latest versions of the unit Dante modules are as follows.
- Brooklyn II （date of latest update: 1 April 2025）
Product Version : V1.0.1 (Updated from V1.0.0)
Software Version : V1.0.1.1
Firmware Version : V1.0.1.1
Dante Firmware Version : V4.2.8.2
- Brooklyn 3 （date of latest update: 1 April 2025）
Product Version : V1.0.2 (Updated from V1.0.1)
Software Version : V1.0.2.1
Firmware Version : V1.0.2.1
Dante Firmware Version : V4.2.9.4
**************************************************************************************************
[ATTENTION]
Audinate has reported a problem with the Dante Updater failing to update Brooklyn 3.
When updating the Dante module firmware using Dante Controller,
always use Dante Controller v4.14.2.1 (Windows/macOS) or later to perform the update.
Dante Controller detailed information
https://my.audinate.com/content/dante-controller-v41421-package-windows
https://my.audinate.com/content/dante-controller-v41421-package-macos
--------------------------------------------------------------------------------------------------
The update method for the Dante module differs depending on the model used (Brooklyn II or Brooklyn 3).
Please check the model as shown below before updating.
[To verify the Dante model]
- Checking with Dante Controller
(1) After launching Dante Controller, double-click the name of the device being used on the Routing tab.
(2) Click the Status tab. The model name is written to the right of “Model” under Dante Information.
- Checking with the TASCAM IO CONTROL app
Check Dante Version Info on the SETTINGS tab.
[Update methods]
- Brooklyn II
The following two methods are available.
- Using Dante Controller
- Using the Dante Firmware Update Manager
(Download the firmware from the TASCAM website and update it using the app)
- Brooklyn 3
Using Dante Controller
For detailed update instructions, please refer to the “TASCAM Dante module update manual”.
**************************************************************************************************
We request that you always use the latest software/firmware version for this unit.
For information about the latest software/firmware, check the TEAC Global Site (http://teac-global.com/)
-------------------------------------------------------------------------------------------------------------
Information about related equipment, software and other versions
-------------------------------------------------------------------------------------------------------------
The following information about versions is current as of April 1, 2025.
Please check individual product pages for the latest information.
- TASCAM Sonicview 16/24
- Firmware : V2.1.0 （date of latest update: 1 April 2025）
- Dante module firmware
< Brooklyn II > （date of latest update: 8 January 2025）
Product Version : V1.0.3
Software Version : V1.0.3.2
Firmware Version : V1.0.3.2
Dante Firmware Version : V4.2.8.2
< Brooklyn 3 > （date of latest update: 8 January 2025）
Product Version : V1.0.3
Software Version : V1.0.3.2
Firmware Version : V1.0.3.2
Dante Firmware Version : V4.2.9.4
- "TASCAM Sonicview Control" software for TASCAM Sonicview 16/24
- Version : V2.0.0 （date of latest update: 8 January 2025）
- "TASCAM Sonicview USB for Windows" USB driver for TASCAM Sonicview 16/24
- Version : V1.10 (date of latest update: 1 April 2025)
- IF-MTR32 32-channel multitrack recording card for TASCAM Sonicview 16/24
- Firmware : V1.12 （date of latest update: 13 December 2023）
- SB-16D
- Firmware : V1.21 （date of latest update: 1 April 2025）
- Dante module firmware
<TASCAM SB-16D units with serial numbers No.223xxxx, 226xxxx, 228xxxx（Brooklyn II）> (date of latest update: 1 April 2025)
Product Version : V1.0.1
Software Version : V1.0.1.1
Firmware Version : V1.0.1.1
Dante Firmware Version : V4.2.8.2
<TASCAM SB-16D units with serial numbers Serial No.232xxxx and later（Brooklyn 3）> （date of latest update: 1 April 2025）
Product Version : V1.0.2
Software Version : V1.0.2.1
Firmware Version : V1.0.2.1
Dante Firmware Version : V4.2.9.4
- "TASCAM IO CONTROL" software for SB-16D
- Version : V1.1.1 （date of latest update: 4 April 2024）
<URLs>
TASCAM Sonicview 16 related :<https://tascam.jp/int/product/sonicview_16/download>
TASCAM Sonicview 24 related :<https://tascam.jp/int/product/sonicview_24/download>
TASCAM IF-MTR32 related ：<https://tascam.jp/int/product/if-mtr32/download>
TASCAM SB-16D related :<https://tascam.jp/int/product/sb-16d/download>
=============================================================================================================
-------------------------------------------------------------------------------------------------------------
<2025.4.1>
Brooklyn II
Product Version : V1.0.1
Software Version : V1.0.1.1
Firmware Version : V1.0.1.1
Dante Firmware Version : V4.2.8.2
Brooklyn 3
Product Version : V1.0.2
Software Version : V1.0.2.1
Firmware Version : V1.0.2.1
Dante Firmware Version : V4.2.9.4
-------------------------------------------------------------------------------------------------------------
< Maintenance items >
- Brooklyn II / Brooklyn 3:
Dante module firmware has been updated.
- Brooklyn II
The secondary IP address would be displayed as "0.2.0.0" and the subnet mask as "0.0.0.0". This has been fixed.
-------------------------------------------------------------------------------------------------------------
<2023.10.18>
Brooklyn 3
Product Version : V1.0.1
Software Version : V1.0.1.1
Firmware Version : V1.0.1.1
Dante Firmware Version : V4.2.7.7
-------------------------------------------------------------------------------------------------------------
< Maintenance items >
- The firmware for the Dante module (Brooklyn 3) has been updated.