-----------------------------------------------------------------------------------------
Latest information
-----------------------------------------------------------------------------------------
The most recent versions of the firmware for this unit are as follows


Unit firmware	: V1.13 (Previously V1.12. Updated at this time)

Windows Driver	: V1.00


Always use the most recent firmware version for this unit.
For information about the latest firmware, visit the TEAC Global Site (https://teac-global.com/).
-----------------------------------------------------------------------------------------
Precautions for updating
- Be careful not to let the power of the MX-8A, the computer or the router be interrupted during the update.
- Be careful not to let any LAN cables become disconnected during the update.
- Be careful not to let the computer go to sleep, for example, during the update.
- If one of the above occurs during the update, the unit might become unstartable.

-----------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------
V1.13 (December 18, 2023)
-----------------------------------------------------------------------------------------
Maintenance items

- In firmware V1.12 and earlier, when the total amount of packet data sent/received exceeded 2 GB due to prolonged operation after power-on, 
  the network connection would become unavailable or the network would be disconnected.
  This issue has been fixed in V1.13.

-----------------------------------------------------------------------------------------
V1.12
-----------------------------------------------------------------------------------------
Maintenance items

- When connected by USB, analog output would become disabled. This has been fixed.

-----------------------------------------------------------------------------------------
V1.11
-----------------------------------------------------------------------------------------
Maintenance items

- Audio input while the unit was starting up was output rather than being muted. This has been fixed.

-----------------------------------------------------------------------------------------
V1.10
-----------------------------------------------------------------------------------------
New functions

- The TASCAM RC-W100 is now supported (enabled with TASCAM MX CONNECT 1.2.0 and later versions).
- The master fader and muting can now be set for MIXER USB OUT (enabled with TASCAM MX CONNECT 1.2.0 and later versions).
- Group functions, which enable linking fader and mute operations between channels, can now be set for up to 4 groups (enabled with TASCAM MX CONNECT 1.2.0 and later versions).

Maintenance items

- Operation stability has been improved.

-----------------------------------------------------------------------------------------
V1.02
-----------------------------------------------------------------------------------------
Maintenance items

- When the MX-8A was not connected to TASCAM MX CONNECT, some DSP functions did not work properly. This has been fixed.
- Operation stability has been improved.

-----------------------------------------------------------------------------------------