-------------------------------------------------------------------------------------------------------------
Latest information (2025.8.27)
-------------------------------------------------------------------------------------------------------------
The most recent versions of the firmware for this unit are as follows.

[Firmware]
 Version           :V0109

[ST 2110 module]
 Firmware Version ：V.2.1.16-j42
 FPGA Version     ：V.1.0.0-b118
 WebUI Version    ：V.1.0.2-b026

Always use the most recent firmware for the main unit and the ST2110 module.
For information about the latest firmware / ST 2110 module, check the TASCAM Global Site <https://tascam.jp/int/product/if-st2110/support>

*************************************************************************************************************
[ATTENTION]
This unit has two types of devices, one for the main unit firmware and one for the ST2110 module.
The update procedures for each are different. See the following manuals for details. 

<Updating the main unit firmware>
 The procedures are the same as those for updating the firmware of the expansion card inserted in SLOT 1/2 of the TASCAM Sonicview 16/24. 
 See “Firmware update procedures” in the Reference Manual on the TASCAM Sonicview16/24 Product page. 
  TASCAM Sonicview 16:<https://tascam.jp/int/product/sonicview_16/support>
  TASCAM Sonicview 24:<https://tascam.jp/int/product/sonicview_24/support> 

<Updating the ST2110 module>
 See “ST2110 module update manual” on the TASCAM IF-ST2110 Product page.
  TASCAM IF-ST2110 : <https://tascam.jp/int/product/if-st2110/support>
*************************************************************************************************************


-------------------------------------------------------------------------------------------------------------
Information about related equipment, software and other versions
-------------------------------------------------------------------------------------------------------------
The following information about versions is current as of August 27, 2025.
Please check individual product pages for the latest information.

- TASCAM Sonicview 16/24
　　- Firmware                         : V2.2.2    （date of latest update: 27 August 2025）

　　- Dante module firmware
      　< Brooklyn II >                            （date of latest update: 17 June 2025）
           Product Version             : V1.0.4   
           Software Version            : V1.0.4.2
           Firmware Version            : V1.0.4.2
           Dante Firmware Version      : V4.2.8.2

        < Brooklyn 3 >                             （date of latest update: 17 June 2025）
           Product Version             : V1.0.4
           Software Version            : V1.0.4.2
           Firmware Version            : V1.0.4.2
           Dante Firmware Version      : V4.2.9.4

- "TASCAM Sonicview Control" software for TASCAM Sonicview 16/24
  　- Version                          : V2.2.1    （date of latest update: 10 July 2025）

- "TASCAM Sonicview USB for Windows" USB driver for TASCAM Sonicview 16/24
    - Version                          : V1.10      (date of latest update: 1 April 2025)

- IF-MTR32 32-channel multitrack recording card for TASCAM Sonicview 16/24
　　- Firmware                         : V1.12     （date of latest update: 13 December 2023）

- SB-16D
    - Firmware                         : V1.21     （date of latest update: 1 April 2025）

　　- Dante module firmware
      　<TASCAM SB-16D units with serial numbers No.223xxxx, 226xxxx, 228xxxx（Brooklyn II）>    (date of latest update: 1 April 2025)
          Product Version              : V1.0.1
          Software Version             : V1.0.1.1
          Firmware Version             : V1.0.1.1
          Dante Firmware Version       : V4.2.8.2

        <TASCAM SB-16D units with serial numbers Serial No.232xxxx and later（Brooklyn 3）>     （date of latest update: 1 April 2025）
          Product Version              : V1.0.2
          Software Version             : V1.0.2.1
          Firmware Version             : V1.0.2.1
          Dante Firmware Version       : V4.2.9.4

- "TASCAM IO CONTROL" software for SB-16D
    - Version                          : V1.1.1     （date of latest update: 4 April 2024）

- IF-ST2110
    - Firmware                         : V0109      （date of latest update: 27 August 2025）

    - ST 2110 module                                （date of latest update: 27 August 2025）
          Firmware Version             ：V.2.1.16-j42
          FPGA Version                 ：V.1.0.0-b118
          WebUI Version                ：V.1.0.2-b026
<URLs>
 TASCAM Sonicview 16 related :<https://tascam.jp/int/product/sonicview_16/support>
 TASCAM Sonicview 24 related :<https://tascam.jp/int/product/sonicview_24/support>
 TASCAM IF-MTR32 related     :<https://tascam.jp/int/product/if-mtr32/support>
 TASCAM SB-16D related       :<https://tascam.jp/int/product/sb-16d/support>
 TASCAM IF-ST2110 related    :<https://tascam.jp/int/product/if-st2110/support>
=============================================================================================================

-------------------------------------------------------------------------------------------------------------
<2025.8.27>
Firmware
  Version          :V0109

ST 2110 module
  Firmware Version ：V.2.1.16-j42
  FPGA Version     ：V.1.0.0-b118
  WebUI Version    ：V.1.0.2-b026
-------------------------------------------------------------------------------------------------------------
< Maintenance items >
[Main unit firmware]
 - The MAC address of the IF-ST2110 card would sometimes be displayed as "0.0.0.0". This has been fixed. 

[ST2110 module]
 - Due to a problem with the CONTROL connector not being recognized properly, PORT 1 would be mistakenly recognized as the CONTROL connector and PORT 2 as PORT 1. This has been fixed.
 - It was not possible to set the default gateway address for the CONTROL and media connectors (PORT 1 / PORT 2) at the same time. This has been fixed.
 - The stream names registered in NMOS are now displayed based on the field names after “s=” in the SDP information area.
 - The number of receiving channels was displayed as 128 on an NMOS viewer. This has been fixed.