============================================================================================================= Latest information ============================================================================================================= The most recent versions of the Firmware/App for this unit are as follows. Firmware: V2.10 Remote control app TASCAM RECORDER CONNECT: V1.2.1 (Previously V1.2.0 Updated at this time) We request that you always use the latest Firmware / App version for this unit. For information about the latest Firmware/App, check the TASCAM Web Site. < https://tascam.jp/int/product/dr-10l_pro/support > < Note > The DR-10L Pro has a built-in secondary lithium battery for retaining date and time information. However, when shipped to consumers new from the factory, the charge could potentially be too low for this particular feature. In this case, date and time retention can be maintained by charging the unit using the battery or USB power supply. With a 24-hour charge, the DR-10L Pro can retain the date and time for around one month. With a 48-hour charge the retention goes up to two months; three months with a 72-hour charge. When charging the recorder, be sure to always have it powered on. The secondary lithium battery cannot be properly charged if the unit is powered off. If possible, always charge the DR-10L Pro via USB bus power for long-term date and time retention. ============================================================================================================= Firmware ============================================================================================================= V2.10 (July, 22 2025) ------------------------------------------------------------------------------------------------------------- < Maintenance items > - When editing audio files recorded on this unit with iZotope RX and then exporting them using "Export Regions to Files", 100 identical files would be created. This has been fixed. - When the connection to the TASCAM RECORDER CONNECT remote control app was lost, it would be difficult to reconnect. This has been improved. - Operation stability has been improved in other ways. ------------------------------------------------------------------------------------------------------------- V2.00 (April, 23 2025) ------------------------------------------------------------------------------------------------------------- < New function > - LTC timecode synchronization is now supported. The DR-10L Pro microphone input can be used to jam sync with a timecode generator. For detailed instructions, refer to the Owner's Manual. ( https://tascam.jp/int/product/dr-10l_pro/support ) < Maintenance items > - Operation stability has been improved in other ways. ------------------------------------------------------------------------------------------------------------- V1.02 (December, 09 2024) ------------------------------------------------------------------------------------------------------------- < Maintenance items > - Operation stability has been improved in other ways. ------------------------------------------------------------------------------------------------------------- V1.01 (October, 31 2023) ------------------------------------------------------------------------------------------------------------- < Maintenance items > - Timecode synchronization stability with compatible Atomos products has been improved. - Operation stability has been improved in other ways. < Note > When updating the firmware from V1.00 using "TASCAM DR-10L Pro Firmware Updater" The DR-10L Pro unit's screen display may become erratic during the update process. In such a case, however, the update is still proceeding normally, so please follow the on-screen instructions of "TASCAM DR-10L Pro Firmware Updater" without unplugging the USB cable. ============================================================================================================= App: TASCAM RECORDER CONNECT ============================================================================================================= V1.2.1 (October, 6 2025) ------------------------------------------------------------------------------------------------------------- < Maintenance items > - When the device with Android app V1.2.0 entered a sleep or background state, the following errors would occur on the FR-AV2. This has been fixed. - ATOMOS timecode connection temporarily interrupted - Remote audio disconnected NOTE: Updating both the app and FR-AV2 unit is necessary to fix this issue. ------------------------------------------------------------------------------------------------------------- V1.2.0 (September, 25 2025) ------------------------------------------------------------------------------------------------------------- < New functions > - The TASCAM FR-AV4 has been added as a supported device. - REC-LINK function has been newly added. This allows the user to select recording devices connected to TASCAM RECORDER CONNECT for synchronized recording operations. - A "NOTE" field has been added to iXML metadata for editing (FR-AV4 only). - Press-and-hold operations for the Stop button are now supported. < Maintenance items > - Operation stability has been improved in other ways. ------------------------------------------------------------------------------------------------------------- V1.1.1 (Novenber, 26 2024) ------------------------------------------------------------------------------------------------------------- < Maintenance items > - Operation stability has been improved in other ways. ------------------------------------------------------------------------------------------------------------- V1.1.0 (September, 2024) ------------------------------------------------------------------------------------------------------------- < New function > - The remote control app "TASCAM DR-10L Pro CONNECT" has been renamed "TASCAM RECORDER CONNECT" to add support for the Portable Field Recorder/Timecode Generator "FR-AV2". TASCAM RECORDER CONNECT can simultaneously control up to 5 DR-10L Pro and FR-AV2 units.