=============================================================================================================
Latest information
=============================================================================================================
The most recent versions of the Firmware/App for this unit are as follows.

  Firmware: V1.02 (Previously V1.01 Updated at this time)

  App: TASCAM RECORDER CONNECT V1.1.0

  We request that you always use the latest Firmware/App version for this unit.
  For information about the latest Firmware/App, check the TASCAM Web Site ( https://tascam.jp/int/product/dr-10l_pro/support )

< Note >
 The DR-10L Pro has a built-in secondary lithium battery for retaining date and time information.
 However, when shipped to consumers new from the factory, the charge could potentially be too low for this particular feature.

 In this case, date and time retention can be maintained by charging the unit using the battery or USB power supply.
 With a 24-hour charge, the DR-10L Pro can retain the date and time for around one month.
 With a 48-hour charge the retention goes up to two months; three months with a 72-hour charge.
 
 When charging the recorder, be sure to always have it powered on.
 The secondary lithium battery cannot be properly charged if the unit is powered off. 
 If possible, always charge the DR-10L Pro via USB bus power for long-term date and time retention.


=============================================================================================================
Firmware
=============================================================================================================
V1.02 (December, 09 2024)
-------------------------------------------------------------------------------------------------------------
< Maintenance items >
- Operation stability has been improved in other ways.

-------------------------------------------------------------------------------------------------------------
V1.01 (October, 31 2023)
-------------------------------------------------------------------------------------------------------------
< Maintenance items >
- Timecode synchronization stability with compatible Atomos products has been improved.

- Operation stability has been improved in other ways.

< Note > 
  When updating the firmware from V1.00 using "TASCAM DR-10L Pro Firmware Updater"
  The DR-10L Pro unit's screen display may become erratic during the update process.
  In such a case, however, the update is still proceeding normally, so please follow the on-screen instructions of "TASCAM DR-10L Pro Firmware Updater" without unplugging the USB cable.

=============================================================================================================
App: TASCAM RECORDER CONNECT
=============================================================================================================
V1.1.0 (September, 2024)
-------------------------------------------------------------------------------------------------------------
< New function >
- The remote control app "TASCAM DR-10L Pro CONNECT" has been renamed "TASCAM RECORDER CONNECT" to add support for the Portable Field Recorder/Timecode Generator "FR-AV2".
  TASCAM RECORDER CONNECT can simultaneously control up to 5 DR-10L Pro and FR-AV2 units.